REAR PANEL LAYOUT
7
1
BLUETOOTH ANTENNA:
Position the Bluetooth antenna in an upright position and keep a clear line of sight to the area
where Bluetooth transmitting devices will be used.
2
POWER ON/OFF:
The MA202R can be powered ON continuously using the back panel power switch. The MA202R
provides a power saving standby mode which keeps the amplifier in a low power “sleep”state
when no input signal is present for more than 4 minutes. The front panel power LED will glow
RED in standby mode and GREEN in normal mode. When the power switch is turned ON initiall
y the power LED will glow green. If the MA202R will not be in use for long periods of time al
switch the back panel power switch OFF.
ways
3
FLAT / LOW PASS SWITCH:
Keep the switch in the FLAT position for normal stereo operation. The FLAT position will broadcast
all input signals without equalization or coloration. This is the normal operating mode of the
MA202R. The LOW PASS switch will engage the internal low pass filters and the LOW PASS FREQ
dial will activate.LOW PASS is a filter that will remove all frequencies above the setting
3
5
4
6
7
8
1
10
2
11
12
9
L
O U TP U T
R