Carver 56 Voyager SE, Owner'S Manual

Page: 90 / 209

AC E
LECTRICAL
S
YSTEM
S
ECTION
3
5627 5/04
3.3.2.37 A/C Water Pump
Do not switch the A/C Water Pump breaker “ON” until after you have
opened the seacock that supplies the air conditioning system with sea-
water. Refer to “4.1 Air Conditioning System” for more information.
This breaker controls the flow of electricity to the water pump that
supplies the air conditioning system with seawater. Switch this breaker
“ON” to supply power to the water pump.
3.3.2.38 Guest Stateroom A/C Unit
Do not switch the Guest Stateroom A/C Unit breaker “ON” until after you
have opened the seacock that supplies the air conditioning system with
seawater. Refer to “4.1 Air Conditioning System” for more information.
This breaker controls the flow of electricity to the heater strip in the
evaporator/blower located beneath the VIP stateroom berth. Before
switching this breaker “ON” to supply power to the heater strip, switch
the A/C Water Pump circuit breaker “ON,” then switch the A/C Compres-
sor 2 circuit breaker “ON.”
3.3.2.39 Master Stateroom A/C Unit
Do not switch the Master Stateroom A/C Unit breaker “ON” until after you
have opened the seacock that supplies the air conditioning system with
seawater. Refer to “4.1 Air Conditioning System” for more information.
This breaker controls the flow of electricity to the heater strip in the
evaporator/blower located aft of the port head’s water closet. Before
switching this breaker “ON” to supply power to the heater strip, switch
the A/C Water Pump circuit breaker “ON,” then switch the A/C Compres-
sor 2 circuit breaker “ON.”
3.3.2.40 Bridge A/C Unit
Do not switch the Bridge A/C Unit breaker “ON” until after you have
opened the seacock that supplies the air conditioning system with sea-
water. Refer to “4.1 Air Conditioning System” for more information.