Page 19 of 25
2.
Press and hold the On/off button for 3 seconds
3.
Check Gri-‐1300 battery terminal connections. Check
sides of ring terminals for corrosion and verify that they
are clean and tightly screwed to the battery.
4.
If problem persists, call Cart Tek for Technical Support.
My caddy is turned on (solid green LED), but my remote will not
work.
1.
Make sure the on/off switch is in the on position on the
remote control transmitter.
2.
Try restarting the caddy by disconnecting the battery for
5 seconds, then powering the caddy back on. Test remote
again.
3.
Ensure that the remote has a flashing red LED when
pressing a function button. If not, replace batteries in
remote.
4.
Pair remote transmitter to caddy cart receiver by using
the supplied USB cord. Follow the directions in the
manual, or check our video
5.
If problem persists, call Cart Tek for Technical Support.
My caddy Lithium Battery Charger isn't switching over from
Orange to Green.
1.
Verify Charger has green ready light before plugging in
battery. If it does not call Cart Tek.
2.
Ensure both the Caddy Battery and wall charger are fully
plugged in.
3.
If problems persist, call Cart Tek for Technical Support.
My caddy SLA Battery Charger isn't switching over from Red
charge light to no light. Stays in charge mode.
