Page 16 of 25
On your remote transmitter, “Press the parking brake button.
Next press and quickly release the Coast/Program Button and
then quickly press and hold the Coast/Program Button again.
While still holding the program button, within a
few seconds
the caddy will move forward at a slow speed.” If cart does not
move, repeat. Your caddy is now in Program Mode.
1.
Store personal speeds on 1-4.
•
(No need to go into program mode)
•
Using the forward and reverse arrow keys on the
remote adjust caddy to your preferred walking pace.
•
Press and hold one of the speed control buttons 1-‐4
while caddy is traveling at your new desired speed.
•
Button is now set to new speed.
2.
Adjust turning force.
You can increase or decrease the
speed at which the caddy turns.
•
Go into Program Mode.
•
Press the reverse button to stop the caddy.
•
To increase the turning power, press the forward
button. To test the adjustment press the left or right
turn buttons
•
To decrease the turning power, press the reverse
button. Test as above.
•
To save your setting, press the Parking Brake
Button.
3.
Adjust Tracking i.e. Caddy trails off to one side or the
other on flat ground.
Electronically adjust tracking only after adjusting bag
weight.
(Instructions for front wheel axel adjustment are
in the troubleshooting section, “
my caddy does not track in
a straight line
” later in this manual).
