Page 17 of 25
•
Go into Program Mode.
•
To adjust the caddy to the left, press left button
once. Or to adjust the caddy to the right press the
right button once. Two button presses adjusts the
tracking about one foot to either side in a 25-‐foot
run.
•
To save the setting, push the Parking Brake button.
•
Test the caddy to see if you need further adjustment.
Repeat as needed.
4.
Return all Programing back to Original Factory
Settings.
•
Go into Program Mode.
•
Press the reverse button to stop the caddy.
•
Press 1,3,4,2 then the parking brake button. Your
caddy should be at factory settings.
5.
Matching a “New Remote Transmitter” to your caddy.
Should you need to replace your remote transmitter, you
will need to pair (match) it to the cart receiver. (NO need
to go into program mode.)
•
With the caddy on (solid green LED), and the
Remote Transmitter on, plug the USB cable into the
USB port under the
receiver dome. Plug the
other end of the cable into
the port on the remote
transmitter.
•
The LED on your remote
will slowly flash.
•
Press and hold the on/off
button
on the caddy
. The
remote transmitter LED will start rapid flashing.
