Cartoni STEERING P70 Maintenance And User Manual Download Page 30

Page: 30 / 33

Steering P70 User’s Manual Page 29

Rotate the steering wheel lock lever (31) towards left to the unlock position (green

point on the steering wheel).

Rotate the steering wheel (2) till the green mark couples the red mark on the steering

wheel support (29).

Lift the steering wheel (2) and pull it out from the steering wheel support (29).

Disassemble the foot ring (16) by unscrewing the three knobs underneath the skid

(central part).

Push the levers (32) to release the skid arms and rotate the two arms till to the lev-

ers (32) click, locking the arms in completely closed position.

Loosen the column from the skid unlocking the skid clamp (6).

Vertically lift the column and extract it from the skid.

Internally close the three support struts (21) along the column.

Summary of Contents for STEERING P70


































Search results

Summary of Contents for STEERING P70

Reviews:

Related manuals for STEERING P70

Brands by name

Popular brands

Cartoni STEERING P70, Maintenance And User Manual

Search results

Summary of Contents for STEERING P70

Reviews:

Related manuals for STEERING P70

Brands by name

Popular brands