Version 18.11.2015
Pa
ge
19
2.7.
Picture settings and guide lines
The picture se
tti
ngs are adjusted by the 3 bu
tt
ons on the video-interface. Press the MENU
bu
tt
on to open the OSD se
tti
ngs menu or to switch to the next menu item. Press UP and
DOWN change the selected value. The bu
tt
ons are embedded in the housing to avoid
accidental changes during or a
ft
er installa
ti
on. Picture se
tti
ngs must be done separately for
RGB, AV1 and AV2 while the corresponding input is selected and visible on the monitor. AV2
and CAM share the same se
tti
ngs which must be adjusted in AV2.
Note:
The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following se
tti
ngs are available:
Brightness
Contrast
Satura
ti
on
Posi
ti
on H (horizontal)
Posi
ti
on V (ver
ti
cal)
Guide lines (ON/OFF)
Note:
If the CAN-box does not support the very vehicle, the guide-lines cannot be used. If
supported and ac
ti
vated, the guide-line also show the steering wheel posi
ti
on dependant
driving path.
