background image

SA-430-10  Installation and Operating Instructions 

Page 13 of 16 

 

 

03/31/10 

CP4854E 

 

PARTS and ACCESSORIES 

The following parts and accessories are available from Carson Manufacturing Company, Inc.: 

Part

 

Description

 

CP5018 

Button, Switch Cap Red   (for Siren pushbutton) 

CP4732 

Control, 1K Vertical Trimmer   (Amplifier) 

CP4834 

Control, 1K Ohm Vertical Mini-Pot   (Control Head PA) 

CP4812-1 

Cover, Amplifier   (Does not include Chassis) 

CP3880 

Cover, Control Head back 

ATO/ATC 20A 

Fuse, 20 Amp Automotive 

CP4852 

Knob, Selector Switch Knob 

CP4853 

Knob, PA Volume Control 

CP4840 

Label, SA-430-10 Front Panel 

CP4750 

Microphone, Noise Canceling w/Connector 

SR-15-1 

Microphone Strain Relief 

CP5014 

Nut, 1/4-40 Dress   (for Siren pushbutton) 

8121D2V40 

Switch, Momentary Push Button, Vertical   (Siren pushbutton) 

7101-T-C-Q 

Switch, Power Toggle 

CP3599 

Switch, Rotary 6-Pos. Selector, Vertical 

CP4119 

Transistor, Output   (2 required) 

 

 

Accessory

 

Description

      * - standard accessory supplied with unit   F or FX model 

CP4872 

Bracket, Control Head Console Mounting 

CP3633   * 

Bracket, Microphone Clip with mounting Screws 

CP3040   * 

Cable, 5-P Control Head Lead Assembly 

ED1757 

Cable, 10-P Amplifier Lead Assembly  8FT   (made w/ CP4833-10 Conn) 

CP3850   * 

Cable, Microphone Extension 18FT for FX model 

CP4833-10   * 

Connector, 10-P Terminal Block Plug w/Locking Screws   (Amplifier) 

ES00028-10   * 

Microphone, Detachable Noise Canceling for FX model 

SA-430-10AMP 

SA-430-10 Remote Amplifier   (includes CP4833-10 Connector) 

SA-430-10CH   * 

SA-430-10 Control Head with attached Microphone for F model 

SA-430-10CHX   *  SA-430-10 Control Head without Microphone for FX model 
CP4854   * 

Manual, SA-430-10 Instruction 

 

 

 

 

See 

www.carsonsirens.com

 for additional information. 

or contact our Service Department at: 

E-mail  [email protected]   or   Phone  (888) 577-6877. 

 

 

 

Summary of Contents for SA-430-10

















Reviews: