20
62--61177--01
8.1.
Maintenance schedule
Service operations are to be carried out according to this schedule :
Interval = road + standby hourmeters.
Unit
Hours
100
1000
2000
3000
4000
5000
6000
7000
Xarios
Initial service
H
Xarios
150/200/300/350/
Service A
H
H
H
H
H
H
H
150/200/300/350/
500 & 600
Service B
H
H
H
8.2.
Services description
Initial Service
Check that the road compressor RPM high and low are correct.
Check the compressor kit is correctly tightened / belt tension.
Check the tightness of bolts and screws and that the unit is correctly fastened onto the
box.
Service A
Check pressure switches, injection thermostats and defrost system.
Clean up battery and battery clamps.
Replace belt(s) compressor(s).
Check for refrigerant leaks.
Check the refrigerant level.
Check the standby compressor oil level.
Check the operation of the cab control.
Service B
Replace condenser fan motor brushes.
Replace idler pulley bearings if any.
EVERY
YEAR
Replace filter drier.
Clean up the TXV orifice filter.
EVERY TWO
YEARS
Replace compressor(s) oil -- only use Ester oil (POE) approved by Carrier Transicold.
Replace refrigerant.
Replace orifice expansion valve.
Refrigerant
: type R404A
Road compressor oil type
: The road compressors are supplied with CARRIER POLYOLESTER (POE) oil.
The presence of a sticker indicates that oil--change has been correctly carried out in our Carrier Transicold
plant. Oils of PAG type are
strictly incompatible
with the operation of our units :
never use an oil other than
that approved by Carrier
.
Oil analysis
: on request, we can analyze your compressor oil.
To do this, we send a small drum with a label on which you should indicate : the type of compressor, the lapse
time or mileage since the last oil change, the type of Carrier equipment, the date of initial operation