11
62--61177--01
5.
RECOMMENDED TRANSPORT TEMPERATURES
Below are some general recommendations on product transport temperatures and operating modes for the
unit. These are included for reference only and should not be considered pre--emptive of the setpoint required
by the shipper or receiver.
More detailed information can be obtained from your Carrier Transicold dealer.
Product
Set--point Range
Bananas
15
_
C
60
_
F
Fresh fruits and vegetables
+4
_
C to +6
_
C
+39
_
F to +43
_
F
Fresh meats and seefood
+2
_
C
+36
_
F
Dairy Products
+2
_
C to +6
_
C
+36
_
F to +43
_
F
Ice
--20
_
C
15
_
F to 20
_
F
Frozen fruits and vegetables
--18
_
C
0
_
F
Frozen meats and seafood
--20
_
C
--10
_
F to 0
_
F
Ice cream
--25
_
C
--20
_
F
* During delivery cycles that include frequent stops and door openings, it is recommended that the unit always
be operated in the continuous run mode to help insure product quality. It is essential to shut down the unit during
the periods when the body doors are open, in order to maintain the temperature of the cargo and keep the unit
operating correctly.
6.
QUICK GLANCE ON THE DISPLAY BOARD
Keep the fold out sheet while reading the instructions.
6.1.
Cab control
Keep the fold out sheet while reading the instructions.
This functionnal accessory simplifies all control operations. From his seat, the driver can carry out all the
control operations : shut--down, automatic start--up in road mode, adjusting the setpoint, defrost.
The driver can display the box temperature and see whether the setpoint is being maintained by checking the
green indicator. The indicator lights up red in the event of a malfunction. When the battery voltage is too low,
a fail--safe system shuts down the unit. Unit restart is automatic and time--delayed if the voltage rises to the
normal level.
1. Display
2 Standby operation LED
6. Set key
7
+
k
2. Standby operation LED
3. Road operation LED
7.
+
key
8. OFF key
3. Road operation LED
4. Manual defrost key
8. OFF key
9. ON key
5.
--
key
10. Unit operation display
Green : off cycle (left half)
Green : off cycle (left half)
Red : malfunction (right half)
