![background image](http://html.mh-extra.com/html/carrier/weatherexpert-48lc-b14-series/weatherexpert-48lc-b14-series_installation-instructions-manual_2561501044.webp)
44
c. Press
OK
, the following display appears:
d. Press
OK
again, the following display appears:
NOTE: If the bottom row displays a number other than 0.000,
press
OK
and use the
▲
and
▼
(Up and Down Arrow) key to
select 0.000.
e. Press
▼
(Down Arrow) once, the following display
appears:
NOTE: If the bottom row displays a number other than 60.000,
press
OK
and use the
▲
and
▼
(Up and Down Arrow) key to
select 60.000.
f. Press the
Back
key until the following display
appears:
g. Press
▼
(Down Arrow) once to move the highlight to
the bottom row and then press
OK
. The following dis-
play appears:
h. Press
OK
once to highlight the number in the bracket.
Press
OK
again; the highlight moves to the current
percent value.
Use the
▲
and
▼
(Up and Down Arrow) keys and the
table below to enter the required Preset Reference
values.
8. Setting the Ramp Time:
a. Press the
Back
key until the following display appears:
b. Press
▼
(Down Arrow) twice, the following display
appears:
c. Press
OK
, the following display appears:
d. Press
OK
again to highlight the bottom row and use the
▲
and
▼
(Up and Down Arrow) keys to select 10.00s.
Press
OK
again to set the selected Ramp up Time.
e. Press
▼
(Down Arrow) once, the following display
appears:
f. Press
OK
again to highlight the bottom row and use the
▲
and
▼
(Up and Down Arrow) keys to select 10.00s.
Press
OK
again to set the selected Ramp Down Time.
9. Setting Limits:
a. Press the
Back
key until the following display appears:
b. Press
▼
(Down Arrow) once, the following display
appears:
c. Press
OK
, the following display appears:
d. Press
OK
again, the following display appears:
e. Press
▼
(Down Arrow) once, the following display
appears:
f. Press
▼
(Down Arrow) again, the following display
appears:
NOTE: Press
OK
to highlight the Hz value and then use the
▲
and
▼
(Up and Down Arrow) keys to enter the required values.
g. Press
▼
(Down Arrow) once, the following display
appears:
NOTE: Press
OK
to highlight the % value and then use the
▲
and
▼
(Up and Down Arrow) keys to enter the required value.
See Tables 10-14 for proper selection of the value for this parame-
ter, then press
OK
to set the selected value.
h. Press
▼
(Down Arrow) once, the following display
appears:
NOTE: Press
OK
to highlight the Hz value and then use the
▲
and
▼
(Up and Down Arrow) keys to enter the required values.
10. Setting Digital Inputs:
a. Press the
Back
key until the following display appears:
b. Press
▼
(Down Arrow) once, the following display
appears:
3—0* Reference Limits
3—1* References
3-02 Minimum Reference
0.000
3-03 Maximum Reference
60.000
3—0* Reference Limits
3—1* References
3-10 Preset Reference
[0]0.00%
[0]0.00%
Stop
[1]LL.LL%
Low Speed (see Tables 10-14, column
labeled “Preset References 3-10[1]” for
the proper % for each unit)
[2]MM.MM%
Medium Speed (see Tables 10-14, col-
umn labeled “Preset References 3-10[2]”
for the proper % for each unit)
[3]100%
Override (High Speed)
[4]100%
High Speed (100% or close to 100% to
achieve the required CFM at high speed)
[5]0.00%
Stop
[6]0.00%
Stop
[7]0.00%
Stop
3—0* Reference Limits
3—1* References
3—1* References
3—4* Ramp 1
3-41 Ramp 1 Ramp up Time
3.00s
3-42 Ramp 1 Ramp Down Time
3.00s
2—** Brakes
3—** Reference / Ramps
3—** Reference / Ramps
4—** Limits / Warnings
4—1* Motor Limits
4—4* Adj. Warning 2
4-10 Motor Speed Direction
[2] Both Directions
4-12 Motor Speed Low Limi…
0.0Hz
4-14 Motor Speed High Limi…
65.0Hz
4-18 Current Limit
110%
4-19 Max Output Frequency
65.0Hz
3—** Reference / Ramps
4—** Limits / Warnings
4—** Limits / Warnings
5—** Digital In/Out
Summary of Contents for WeatherExpert 48LC B14 Series
