![background image](http://html.mh-extra.com/html/carrier/wall-mounted-air-conditioner/wall-mounted-air-conditioner_owners-manual_2561494004.webp)
OPERATING INSTRUCTIONS
8. Connecting
9. Connecting
10. Stop valve
pipe
cable
Outdoor unit
Outdoor unit
1. Front panel
2. Air inlet
3. Air filter
4. Air outlet
5.
6.
7. Display panel
Horizontal air flow grille
Vertical air flow louver(inside)
Signal receiver
Indoor unit
Indoor unit
Special functions
9
10
8
OPERATION indication lamp
This lamp illuminates when the air
conditioner is in opera tion.
ION indica tion lamp(optional func tion)
This lamp illuminates when Clean
Air feature is activated .
TIMER in dication la mp
Lights up during Timer operation.
DEFROST indication lamp
(Enabled on cooling & heating models only):
w hen the air conditioner starts
defrosting automatically or when the warm
air control feature is activated in heating
operation.
Lights up
Temperature indicator
Displays the temperature settings when the
air conditioner is operational.
Displays the malfunction code.
NAMES OF PARTS
Indication lamp
Indication lamp
NOTE:
All the pi ctures in this manual are for
explanation purposes only.
The
actual shape shall prevail.
The actual shape
of the indoo r unit you purchased may be slight
different on front panel and d isplay window.
Names of parts
This air conditioner is equipped with ionizer or Plasma Dust Collector(Depending on specif ic
configuration of the model). With the anion s generated by Ionizer, the air circulation of th e air
conditioner fills the room with refreshing, n atural and healthy air. The Plasma Dust Collector
generates a high voltage ionization zone, t hrough which the air is converted to plasma. Inside
the air most of the dust, smoke, and pollen particles are captured by the electrostatic filter.
CLEA N A IR f unct ion (on some m odels)
Vertical swing func tion
(
)
Optio nal
After the AC starts up, users can control the vertical louver swing by the remote controller.
SELF C LE AN func tion
(
)
Optio nal
Function us ed after the Shut Down of cooling operation to clean the Evapor ator
and keep it as fresh for the next operation.
The unit w ill oper ate as follow ing sequence : FAN ON LY mode at Low fan speed--Heating
operat ion with LOW fan speed(a pplicable to cooling & heating modles only) ---FAN ONLY
operat ion--S top Operation---Turn off.
This function is only av ailable under COOL(AU TO C OOL, FORC ED COOL) and DRY mode.
Before select the function, it is r ecommended to run the a ir conditione r under Cooling
operat ion for about half an hour. Once the Self Clean function is activated, all TIMER
setting will be canc elled.
During Self Clean operation, when pr es s the SELF C LEAN button on the remote
contr oller again wil l stop the operation and turn off the unit automatically.
Note:
Louver A ngle Memo ry Function( optional):
W i thin the scope of safety angle, it w i ll memorize the open angle of hor i zontal louver.
If i t exceeds, it will memorize the bo undry of safety angle. In the follow ing circumstances,
it w i ll return to standard angle: 1) pre ssing the manual switch, 2)unplug and then plug
in the machine. S o we strongly su ggest that th e open angl e of the horiz ontal louver should
not be se t too small, in case the co ndensed wa ter forms and drops from the horizont al louver.
Refrigerant Leakage D etect ion
With this new technology, the dipsplay area will appear EC and the indication lamps
continue flashing when the outdoor unit detects refrigerant leakage.
,
,
Anti- mildew f unct ion
(
)
Optional
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on
HEAT mode, the unit will continue operating for a bout 30 seconds at LOW fan speed. This will
help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.