Carrier Transicold 69NT40-561-001, Operation And Service Manual, Page: 178 / 182

T-340 Index–2
Frozen Mode - Temperature Control 4-9
Frozen Mode Cooling - Sequence of Operation 4-10
Frozen Steady State 4-9
G
General Protection 4-14
Generic Mode - DataCORDER 4-18
Gutters 2-2
H
Handles 2-2
Handling Modules 7-24
Humidity Sensor (HS) Troubleshooting 7-36
I
Installing the Solenoid Valve 7-20
Installing the Solenoid Valve Coil 7-20
Interrogator 2-2
ISO Trip Header 4-24
K
Keypad 4-2
L
Labels 2-3
Logging Interval (dCF03) 4-18
Lower Air (Fresh Air Make Up) 2-3
Lower Fresh Air Makeup Vent 5-3
Lower VPS 7-35
M
Maintenance Precautions 1-1
O
Operating Precautions 1-1
Operational Software (Cd Function Codes) 4-4
Option Descriptions 2-2
Optional 5+1 Heater Arrangement 7-15
P
Partlow Recorders 5-8
Perishable Dehumidification 4-6
Perishable Dehumidification - Bulb Mode 4-7
Perishable Economy 4-7
Perishable Heating 4-5
Perishable Idle, Air Circulation 4-5
Perishable Mode - System Pressure Regulation 4-14
Perishable Mode - Trim Heat 4-9
Perishable Mode Cooling - Sequence of Operation 4-7
Perishable Mode Heating - Sequence of Operation 4-8
Perishable Mode Temperature Control 4-5
Perishable Pulldown 4-5
Perishable Steady State 4-5
Physical Inspection 5-8
Plate Set 2-1
Pressure Readout 2-1
Pre-trip Data Recording 4-21
Pre-trip Diagnosis 5-8
Pre-Trip Diagnostics 4-16
Probe Disagreement 5-10
Programming Software Versions 5350 and Greater 7-26
Programming Software Versions prior to 5328 7-25
Q
Quest - CCPC 2-2
R
Recalibrating the Temp Recorder to Zero 7-43
Refrigeration Circuit 3-10
Refrigeration Unit - Front Section 3-1
Remote Monitoring 2-2
Removal and Replacement of Compressor 7-7
Removing a Solenoid Valve Coil 7-19
Removing and Installing a Controller 7-28
Removing the Solenoid Valve 7-20
Replacing 7-10
Replacing Electronic Expansion Valve and Screen 7-18
Replacing the Evaporator Fan Assembly 7-16
Replacing the Recorder 7-42
S
Sampling Type (dCF05 & dCF06) 4-20
Sensor Checkout Procedure 7-29
Sensor Configuration (dCF02) 4-18
Sensor Re-Installation 7-33
Sensor Replacement 7-31
Servicing the eAutoFresh Air Filter 7-38
Servicing the eAutoFresh Drive System 7-40
Specific Hazard Statements 1-1
Standard Mode 4-18
Standard Operation 3-10
Start Temperature Recorder 5-8
Start up - Compressor Bump Start 4-5
Start up - Compressor Phase Sequence 4-5
Starting the Unit 5-7
Stopping the Unit 5-8