Room Controller
GB - 2
General information
• Pay special attention to maintaining a comfortable room
temperature above all for children and elderly or handicapped
persons.
• For correct use the conditioner must only operate at the
temperatures indicated in the “Operating Limits” table in the
installation manuals of the outdoor and indoor units.
If the unit is made to operate beyond these limits faults or
water leaks may occur.
• Make sure the Room Controller control unit has not been
damaged in transport; if the opposite is true file an immediate
claim with the shipping company.
• Only use the appliance for the purpose it was designed.
• Dispose of packaging material in accordance with local
requirements.
• Do not open the appliance otherwise it may suffer damage. In
case of malfunctioning, contact a qualified service engineer.
Characteristics
The air conditioning system is managed by a centralised
system which runs the air conditioner daily in “Comfort” mode
during the hours it is expected that there will be persons in the
room and in “Economy” mode during the remaining hours.
The individual and personalised adjustment of the temperature
and operating mode is possible at any moment.
Use
“
UP
” and “
DOWN
” buttons
Buttons for raising or lowering the temperature or for selecting
the “
AUTO
” or “
SWING
” louver mode.
MODE
Button for operation mode selection.
FAN
Button for fan or louvre selection.
General information, use and operation
up
down
Operation
By pressing the “
MODE
” button we pass from the “Comfort”
mode to the “Economy” mode and vice versa.
In the “Comfort” mode the temperature
of the room will be kept between
20
°
C and 24
°
C.
On the graphic temperature bar
there will only be one blackened segment.
In the “Economy mode” the
temperature of the room will be
kept between 18
°
C and 26
°
C.
The temperature is shown
on the display.
The graphic bar of the
temperature is not displayed.
Temperature variation
The centralised management system determines a comfort
zone delimited by a maximum and a minimum temperature.
This comfort zone can be varied depending on individual needs
by using the “
UP
” and “
DOWN
” button (to increase or decrease
the temperature).
Variation 0
Var1
Var2
Var3
Var4
Each time the button is pressed, different segments of the
graphic temperature bar go black.
up
down
