manualshive.com logo in svg

Carrier P1 Series, Owners And Installation Manual, Page: 36 / 38

Share
Download
Carrier P1 Series Owners And Installation Manual Download Page 36

TROUBLESHOOTING

Trouble

Check  Points

Action

Check that the power cord is plugged

Insert the  power cord into the wall outlet.

into the wall outlet.

Unit does not

Has the circuit breaker tripped or has the

Reset the circuit breaker or replace the

operate

fuse blown?

fuse with the specified replacement fuse.

Has there been a power failure?

Restart operation when power is resumed.

Does the “UNIT ON” lamp flash on and off?

Call your service representative.

Is the voltage too low?

Confirm the  available voltage.

Is the filter blocked with dust? 

Clean the air filter. 

Has the temperature been set properly? 

Check and reset it if necessary. 

Cooling is 

Are the windows or doors open? 

Close the windows and doors.

abnormally low. 

Is anything obstructing the outdoor unit? 

Remove the obstruction.

Is the fan speed too low? 

Change the fan speed selection.

Is the operation mode FAN or AUTO?

Change to cooling operation or reset the
temperature.

Is the filter blocked with dust?

Clean the air filter. 

Heating is 

Has the temperature been set too low?

Check and reset it if necessary.

abnormally low.

Are the windows or doors open?

Close the windows and doors.

Is anything obstructing the outdoor unit?

Remove the obstruction.

Unit stops during 

Is the OFF timer operating?

Restart operation.

operation.

Has the room temperature reached the 

Normal operation.

set temperature?

If the above actions do not correct the operation, consult the dealer from whom you bought the unit.

34

Summary of Contents for P1 Series







































Reviews:

No comments