manualshive.com logo in svg

Carrier P1 Series, Owners And Installation Manual, Page: 19 / 38

Share
Download
Carrier P1 Series Owners And Installation Manual Download Page 19

Lift the front panel and pull  the air filters
downward.

Clean the filters with a vacuum cleaner.

Rinse the filters under running water,
dry completely. and refit correctly into
their guides.

• Turn off the unit and pull out the power plug before cleaning.
• Clean the air filters once a month.

NOTE

17

CARE AND MAINTENANCE

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

1234567890123456789012345678901212345678901234567890123456789012123456

  CLEANING THE FILTERS AND FRONT PANEL

Cleaning the Air Filter

1

2

3

Refreshing the optional Photo-catalyst filter

1

2

3

Lift the front panel and pull the optional Photo-
catalyst filter downward.

Blow off the dust from the filter with fresh air
or wash the filter under running water.

Expose under direct sun light for 6 hours and
refit correctly into its guide.

Summary of Contents for P1 Series







































Reviews:

No comments