Specifications subject to change without notice.
3 of 5
Standard Range Zone Pressure Multi-Sensor (ZPM)
Installation and Operation
Catalog No. 11-808-711-01
#38592
–
1/10/19
Mounting
Attach the unit to its mounting surface with four self-tapping
#10x3/4” sheet metal screws through the holes in the mounting
feet. The preferred mounting orientation is with the pressure
ports facing down.
Remove the deadhead tubing and push the system tubing onto
the port nipple without creating any kinks or holes.
Figure 3:
ZPM Mounting
A locking screw can
be inserted into the
hole in the cover latch
to prevent unintentional
cover openings.
Figure 4:
Cover
Latch Screw
Center
hole is only
needed for
the Attached
Tube (-AT)
version of the
ZPM unit
Figure 5:
Mounting Hole
Template - shown
actual size
(Carrier recommends
creating 5/32” pilot
holes for the #10x3/4”
self-tapping mounting
screws.)
