background image

GB - 10

42PHW / 42PHQ / 42PHQ...K

Ensure that the air distribution in the room is uniform by properly
adjusting the air flow direction.

Correct cleaning

• Turn the unit off and switch the mains supply off.

Use only a clean, damp and soapy cloth. Do not pour any liquids on
the unit. Do not use flammable liquids, solvents or abrasive
powders.

Keep heat sources away from the unit and do not place anything
hot on it; panels may be damaged.
The remote control should only be cleaned with a dry cloth.

Occasionally clean the area around the outdoor (leaves etc.) to
avoid reduced air circulation.

Air cleaning system

Standard air filters:

 they eliminate dust and lint.

Optional electrostatic active carbon filter:

 this is

particularly effective to eliminate odour and microscopic dust.

Optional electrostatic photocatalytic filter:

 this effectively

eliminates microscopic dust and cigarette smoke in the room air.

Optimum comfort and lowest consumption

Keep room temperature at comfort levels.
Do not open doors and windows more frequently than necessary.

When cooling, avoid direct sun in the room: if possible, shut
curtains or shades.

Do not obstruct the air intake or outlet of the unit. Obstructions will
cause a reduction of the air quantity and the conditioning effect,
resulting in unit malfunction.

Air cleaning system, optimum comfort and lowest consumption, correct cleaning

     

Summary of Contents for Niceday 42PHQ















Reviews: