![background image](http://html1.mh-extra.com/html/carrier/n-style/n-style_owners-manual_2561399014.webp)
E -
12
USE OF REMOTE CONTROL (Cont.)
ON TIMER FUNCTION
ON TIMER function is useful when you wake up in the morning or when you return home.
A.
ON TIMER button
ON
(button
7
)
Press this button, even if the remote control is OFF.
The relevant icon and time figure will start to flash.
The Timer orange led of the indoor unit will be on.
Press
ON
timer button (button 7).
The
ON
timer icon will start to flash.
If 10 seconds have elapsed and no button is pressed,
the remote control turns OFF (if it was already OFF when button
ON
was pressed) or timer function automatically deactivates.
This function can be set even if the remote control is
ON
Note:
If 10 seconds have elapsed and no button is pressed,
the remote control turns OFF (if it was already OFF when
button
ON
was pressed) or timer function automatically
deactivates.
B.
TIME ADJUSTEMENT FOR ON TIME FUNCTION
-
If the unit is ON, the only possible selection is
the start-up time. The unit will operate with the selections
shown on the display.
-
If the unit is OFF : to select the start-up time, use
the temperature control buttons (b
and
-)
•
To adjust hours, Press
HOUR
button
•
To adjust minutes, Press
MINUTE
button
•
Then press
SET
button to confirm selection.
C.
OPERATING MODE SELECTION
•
Press button
(MODE) to select the desired operating mode
.
•
Press button
ON
to confirm the selection.
D.
DESIRED TEMPERATURE SELECTION
•
Press button
+
or
-
to select the desired temperature.
•
Press button
ON
to confirm the selection.
E.
FAN SPEED SELECTION
•
Press button
FAN
to select the desired fan speed.
•
Press button
ON
to confirm the selection.
F.
HORIZONTAL FLAPS POSITIONING
•
Press button
SWING
, to select the desired position.
•
Press button
ON
to confirm the selection.
•
If you want to cancel selections up to here inserted, push
button
CANCEL
;
•
if you want to cancel all selections once timer has been set,
push button
ON
, and then button
CANCEL
Notes
•
When the ON Timer function is operating, the unit senses the room air temperature 1 hour
before the start-up time.
•
The unit start can be brought forward based on the programmed start time, by 0 to 40 minutes,
depending on the temperature difference between the room and the selected temperature.
B
D
A
C
E
F
B
D
B