Document revision history
MPC Open XP
MPC Open XPIO48/816
CARRIER CORPORATION ©2019
Installation and Start-up Guide
All rights reserved
43
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
8/14/14
MPC Open XP specifications
Maximum number of BACnet third-party integration points using
Snap - changed to unlimited, depending on memory
Power - removed references to BACview
Rnet port - added Equipment Touch and removed BACview
Rnet port - added note that number of possible ZS sensors you
can have with an Equipment Touch is 15
Local Access port - removed BACview, added Equipment Touch
Battery - added Equipment Touch and removed BACview
C-D-LJ-O
Wiring devices to the Rnet port
Changed from "Wiring a communicating zone sensor to the MPC
Open XP"
Removed references to BACview
Connecting an SPT sensor
Removed BACview and added Equipment Touch
To wire an Equipment Touch to the
MPC Open XP
New topic
BACview devices
Removed references and topics
Local Access to the MPC Open XP
Removed BACview and added Equipment Touch
To wire the Equipment Touch to the
MPC Open XP
Added Caution to maintain polarity and use the power supply only
for Carrier controllers
C-TS-RD-E
Restore factory defaults
Corrected from using a jumper to holding the Format button
C-D-LJ
* For internal use only