![background image](http://html1.mh-extra.com/html/carrier/gemini-select-38apd025-130/gemini-select-38apd025-130_installation-instructions-manual_2561318006.webp)
6
30RAP010-060 UNITS WITHOUT AUX BOARD — Per-
form the following procedure to install the harness and
make the wiring connections. See Fig. 11 for wiring.
1. Install the new harness 38APHSCALECA00. Install
plug labeled EXV-J4 to EXV-J4 and other end labeled
EMM-J3 to EMM-J3.
2. Install the new harness 38APHSCALECA10. Install plug
labeled MBB/EXV-J2 to MBB-J2 and other end labeled
EMM-J1 to EMM-J1.
3. Install the new harness 38APHSCALE-A00. Install plugs
labeled EMM-J6 and J7 to EMM-J6 and J7 and other end
labeled LVT-J10 to LVT terminal strip.
30RAP070-150 UNITS WITH AUX BOARD — Perform
the following procedure to install the harness and make the
wiring connections. See Fig. 12 for wiring.
1. Disconnect the CXB connector J4 and plug it into the
EMM connector J4.
2. Install the new harness 38APHSCALECA00. Install plug
labeled EXV-J4 to CXB-J4 and other end labeled EMM-
J3 to EMM-J3.
3. Install the new harness 38APHSCALECA10. Install plug
labeled MBB/EXV-J2 to CXB-J2 and other end labeled
EMM-J1 to EMM-J1.
4. Install the new harness 38APHSCALE-A00. Install plugs
labeled EMM-J6 and J7 to EMM-J6 and J7 and other end
labeled LVT-J10 to LVT terminal strip.
30RAP070-090 UNITS WITHOUT AUX BOARD — Per-
form the following procedure to install the harness and
make the wiring connections. See Fig. 11 for wiring.
1. Install the new harness 38APHSCALECA00. Install the
plug labeled EXV-J4 to CXB-J4 and other end labeled
EMM-J3 to EMM-J3.
2. Install the new harness 38APHSCALECA10. Install plug
labeled MBB/EXV-J2 to CXB-J2 and other end labeled
EMM-J1 to EMM-J1.
3. Install the new harness 38APHSCALE-A00. Install plugs
labeled EMM-J6 and J7 to EMM-J6 and J7 and other end
labeled LVT-J10 to LVT terminal strip.
30MP015-045 UNITS WITH AUX BOARD — Perform
the following procedure to install the harness and make the
wiring connections. See Fig. 13 for wiring.
1. Disconnect the MBB connector J3 and plug it into the
EMM connector J3.
2. Install the new harness 38APHSCALECA00. Install one
end of the harness in MBB connector J3 and the other end
in EMM connector J4.
3. Install the new harness 38APHSCALECA10. Install plug
labeled MBB/EXV-J2 to MBB-J2 and other end labeled
EMM-J1 to EMM-J1.
4. Install the new harness 38APHSCALE-A00. Install plugs
labeled EMM-J6 and J7 to EMM-J6 and J7 and the other
end labeled LVT-J10 to J10 of the LVT terminal strip.
5. Install the new harness 38APHSCALXCA00 provided.
Install plug labeled EMM-J3 to EMM-J3 and other end
labeled AUX-J9 to AUX-J9.
30MP015-045 UNITS WITHOUT AUX BOARD — Per-
form the following procedure to install the harness and
make the wiring connections. See Fig. 13 for wiring.
1. Install the new harness 38APHSCALECA00. Install
one end of the harness in MBB connector J3 and the
other end in EMM connector J4.
2. Install the new harness 38APHSCALECA10. Install plug
labeled MBB/EXV-J2 to MBB-J2 and other end labeled
EMM-J1 to EMM-J1.
3. Install the new harness 38APHSCALE-A00. Install plugs
labeled EMM-J6 and J7 to EMM-J6 and J7 and the other
end labeled LVT-J10 to J10 of the LVT terminal strip.
FIELD WIRING CONNECTIONS — Refer to Fig. 9-13
for field wiring interfaces with the LVT terminal strip.
Controls Configuration for EMM Options —
Refer to the 38AP controls and troubleshooting manual for
split system configuration of controls. Refer to the 30RAP
controls and troubleshooting manual for Aquasnap
®
configu-
ration of controls. Refer to the 30MP controls and trouble-
shooting manual for configuration of controls.
StockCheck.com
Summary of Contents for GEMINI SELECT 38APD025-130
Page 11: ...S t o c k C h e c k c o m...