45
ADVANCED PROGRAMMING OPTIONS
Turning on the programmable fan feature
When you turn on the programmable fan feature using these instructions, you can
program the fan selection to “auto” or “on” for each of the program schedule
periods. (Learn more about this on page 25.)
1. Open the door.
2. Press and hold the
buttons underneath the heat and
cool setpoints
simultaneously (the two bottom buttons
on the right) until the screen displays the reset reminders
and
01
in the lower right corner.
3. Press the
up
arrow button until
01
changes to
07
with
OF
(fan mode) next to it.
4. To turn the fan on, press the
rightmost lower button
then press the
up
arrow button until the screen displays
ON
. To turn the fan off, press the
rightmost lower but-
ton
then press the
down
arrow button until the screen
displays
OF
(off).
5. Press the
done
button.
6. Close the door.
Summary of Contents for Edge TP-PAC
