Carrier Edge TP-PAC, Owner'S Manual

Page: 26 / 64

24
PROGRAMMING THE THERMOSTAT
6. Set the cooling temperature for that time period by press-
ing the
button under the cool set at :
temperature on
the right and then pressing the
up
or
down
button until
you reach the desired cooling temperature.
7. Repeat this process for each of the three remaining time
periods – day, evening and sleep – by first pressing the
button under the four time periods
to select the
time period with the arrow. To change the
start at
time,
press the
button under the hour or minute
, then
press the
up
or
down
button, stopping on the desired
time. To set the heating temperature, press the
button
under heat set at :
, then press the
up
and
down
button,
stopping on the desired temperature. To set the cooling
temperature, press the
button under
cool set at
:,
then
press the
up
or
down
button, stopping on the desired
temperature.
8. To set the schedule for another day, press the
button
under the days of the week
on the left again until
the arrow is next to the day you want to program.
9. Repeat steps 4 through 7 to program that day.