13
QUICK START
4. Press the
up
or
down
button, located to the right of the
display, to change the displayed setting. Stop on the de-
sired setting.
5. When there are arrow indicators next to both the words
heat
and
cool
at the top right of the screen, the heating
and cooling temperatures are also displayed at the bottom
of the screen. You can change either one by pressing the
button underneath the temperature you want to
change
, then pressing the
up
or
down
button on the
right. Repeat the process for the other temperature if ne-
cessary and press the
done
button when you are fin-
ished.
6. The thermostat will hold these changes for two hours or
until the next programmed cycle begins, as indicated by
the words
temporary hold for 2:00
next to the set tem-
peratures. To change the amount of time the temperature
is on hold, press the
button under the hold hours or
minutes
. Then press the
up
or
down
button on the
right. Stop at the desired amount of hold time.
7. Close the door.
Summary of Contents for Edge TP-PAC
