Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53330010-01
Printed in U.S.A.
Form 33CS-65SI
Pg 1
8-08
Replaces: New
Installation Instructions
Part Numbers 33CS2PPRH-01 and 33CS2PP2S-01
CONTENTS
SAFETY CONSIDERATIONS
. . . . . . . . . . . . . . . . . . . . . . 1
GENERAL
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
PACKAGE CONTENTS
. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
INSTALLATION CONSIDERATIONS
. . . . . . . . . . . . . .1,2
Control Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Outdoor Temperature Sensor
. . . . . . . . . . . . . . . . . . . . 2
Remote Indoor Temperature Sensor
. . . . . . . . . . . . 2
INSTALLATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Thermostat Location
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wiring Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Two-Piece Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Single-Piece Installation
. . . . . . . . . . . . . . . . . . . . . . . . . 5
Power
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Humidification Equipment and Connections
(33CS2PPRH-01 Model Only)
. . . . . . . . . . . . . . . . . . . . 5
Dehumidification Equipment and Connections
. . . 5
CONFIGURATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-9
To Enter and Exit Configuration Mode
. . . . . . . . . . . . 5
Configuration Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Configuration Options
. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SYSTEM START-UP AND CHECKOUT
. . . . . . . . . .9,10
Installer Test Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Final Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Default Schedule
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the Clock, Calendar, Daily Schedule,
and Holiday Settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Humidity Control Features
(33CS2PPRH-01 Only)
. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Holiday
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
OPERATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10,11
Timers
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Heat/Cool Set Points (Desired Temperature)
. . . . . 11
Equipment On Indicators
. . . . . . . . . . . . . . . . . . . . . . . . 11
Humidification and Dehumidification
Indicators
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Auto Changeover
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Emergency Heat Mode
. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Dry Contact/Economizer Input
. . . . . . . . . . . . . . . . . . 11
TROUBLESHOOTING
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Error Codes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
WIRING DIAGRAMS
. . . . . . . . . . . . . . . . . . . . . . . . . . 11-19
THERMOSTAT CONFIGURATION RECORD
. . . . CL-1
SAFETY CONSIDERATIONS
Read and follow manufacturer instructions carefully. Fol-
low all local electrical codes during installation. All wiring
must conform to local and national electrical codes. Improper
wiring or installation may damage sensor.
Recognize safety information. This is the safety alert sym-
bol
. When the safety alert symbol is present on equipment
or in the instruction manual, be alert to the potential for person-
al injury.
Understand the signal words DANGER, WARNING, and
CAUTION. These words are used with the safety alert symbol.
DANGER identifies the most serious hazards which will result
in severe personal injury or death. WARNING signifies a haz-
ard which could result in personal injury or death. CAUTION
is used to identify unsafe practices which would result in minor
personal injury or property damage.
GENERAL
Carrier’s 7-day, 5/2-day, or 1-day programmable commer-
cial thermostat control is a wall-mounted, low-voltage control
which provides
temperature control in either a single unit or a
two-piece unit. The 33CS2PPRH-01 will provide both temper-
ature and humidity control. In two-piece configuration, the re-
lays are located near the equipment and a two-wire connection
is used between the display module (user interface) and the
equipment control module. Single-piece installation requires
more wiring and results in a higher profile. The thermostat has
no need for batteries to store user-configured settings in memo-
ry. During power loss its internal memory saves settings for un-
limited time, and the clock continues to run for at least
24 hours.
In the programmable configuration, different heating and
cooling set points and times are programmable for 4 periods
per day or 2 periods per day. Programming can be done for
7 days per week, 5 and 2 days per week, or 1 day. The pro-
grammable control can also be user configured as a non-
programmable control.
PACKAGE CONTENTS
1 — Display module
1 — Stand-off for equipment control module
2 — Screws and anchors
1 — Pigtail
1 — Equipment control module with cover
INSTALLATION CONSIDERATIONS
There are two types of thermostats available. The
33CS2PP2S-01 provides temperature control and the
33CS2PPRH-01 provides both temperature and humidity con-
trol. Both models can be configured for air conditioner or heat
pump installations and may be configured as non-programma-
ble if user desires.
Control Configuration —
The thermostat can be in-
stalled in one of two configurations. The thermostat may be in-
stalled as a single-piece or it may be split into two pieces and
mounted in separate locations.
IMPORTANT: Read entire instruction before installing
the thermostat.
EDGE
®
Pro
Programmable
Commercial Thermostat
