Registering and setting up a mobile device for enhanced access
Carrier Connect™
Wi-Fi Thermostat
Carrier Proprietary and Confidential
CARRIER CORPORATION ©2017
Installation Guide
14
All rights reserved
3
Swipe or click to navigate to the
SETTINGS
screen.
NOTES
○
Navigate by clicking or pressing the buttons such as
SETPOINTS
,
FAN
,
PROGRAM
, etc..
○
Grayed out function buttons indicate that feature is not being used on the thermostat.
Screens
Use to...
SETPOINTS
Adjust the occupied and unoccupied setpoints by selecting each temperature.
FAN
View and modify fan settings.
•
The default setting for fan operation is
AUTO
for both Occupied and Unoccupied periods.
When operating in
AUTO
MODE
, the fan only runs when there is an active heating or
cooling demand.
•
When you select
ON
, the fan runs continuously, except during the
Blower On Delay
when
a heat cycle is starting. There is a 30-second minimum on/off timer when changing the
FAN MODE
.
NOTE
The following selections are not available if the thermostat has been configured for non-programmable
operation.
HUMIDITY
Adjust the thermostat's humidify and dehumidify setpoints.
PROGRAM
You can:
•
Set Occupied and Unoccupied start times, depending on the configured number of
periods and the user’s security level.
•
Select the time at the bottom of the screen to adjust the start or stop time of each
period in 15 minute increments.
•
Select
Copy
to apply that schedule to other days of the week.
•
Adjust the setpoints for each period.
