ComfortVu™ BACnet Thermostat Model Standard TB-24-HM (24 Vac)Carrier Proprietary and Confidential
CARRIER CORPORATION ©2020
Installation and Operation Guide
All rights reserved
15
Temporarily disable the program
- without losing programmed information – for example, when out of the
office or leaving for vacation:
○
Make sure that the set-point temperature is not 10/11ºC or 50/52ºF.
○
Press and hold the
button to temporarily disable the program.
○
Press and hold the
button again to reactivate to the program.
Override the program
- the occupant can temporarily change the set point temperature to be different than
the set point temperature specified by the program. Changes remain in effect until the next program event
begins.
Programming procedure
The detailed programming procedure is described in the next sections. Make sure to follow the right
programming procedure, suitable for the program type and features selected by Technician Settings.
Press the [C/F-Prog] button to enter and proceed through the steps of the real time clock and programming
procedure.
Use the [+] or [-] buttons to select or change value of a flashing icon.
It is recommended to select programming values prior to the actual programming.
Exit the programming procedure
At any time during the programming procedure, press the [On/Off] button to exit and return to normal display. Any changed
values will be saved.
Adjusting the time and day of the week
1. Press and hold the [C/F-Prog] button. The word “Clock” will appear on display, and the
HOURS will flash.
Hours
2. Use the [+] or [-] buttons to adjust the hours.
Minutes
3. Press the [C/F-Prog] button again. The MINUTES will flash.
4. Use the [+] or [-] buttons to adjust the hours.
Summary of Contents for ComfortVu TB-24-HM
Page 71: ......
Page 72: ...CARRIER CORPORATION 2020 Catalog No 11 808 723 01 2 18 2020 ...