![background image](http://html1.mh-extra.com/html/carrier/comfortpro-pc6000/comfortpro-pc6000_operation-and-service-manual_2563807021.webp)
62-11175 COMFORTPRO SERVICE MANUAL
1-12
Turning BATTERY MONITORING ON and OFF
1
Press .
2
Press or until
"
BATTERY MONITOR
" is displayed,
then press
.
BATTERY MONITOR
OFF
ON
OFF
HOURS
0 0 0 0 0
APU
If "
ENTER PASSWORD
" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3
Press or to
display
"
ON
" or "
OFF
".
4
Press
to confirm this setting.
The current setting remains until you change it; turning off the APU or
manually starting the APU does not permanently cancel this setting.
The APU starts if the battery voltage goes below the level you specify here.
Setting the Voltage Level
1
Press .
2
Press or until
"
BATTERY MONITOR
" is displayed,
then press
.
BATTERY MONITOR : SET
OFF
11.8 V
OFF
HOURS
0 0 0 0 0
APU
NOTICE
Factory Default Voltage Setting is
11.8V.
Range is 11.0V to 13.5V.
If "
ENTER PASSWORD
" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3
Press or to
display
"
SET
".
4
Press
to confirm this setting. The current voltage level is
displayed and flashes.
5
Press
or
to scroll to the desired voltage.
6
Press
to confirm this setting. Or press
to cancel and
retain the current voltage.
7
Press
to exit.
MENU
You can set up the APU so that it automatically runs for 90 minutes when
the truck batteries are low.
When you set up this feature, you must enter the current voltage of the
batteries (see “Set the Initial Voltage”). The ComfortPro can then calculate
how much the voltage drops, as the batteries are used.
Set the INITIAL VOLTAGE
1
. Press .
2
Press or until
"
CALIBRATE VOLTAGE
" is displayed,
then press
.
HOURS
0 0 0 0 0
APU
OFF
CALIBRATE
VOLTAGE
OFF
1.3.8 Battery Monitoring
If "
ENTER PASSWORD
" is displayed, enter your password. If you do not
know the password, then you cannot set up this function (see page 1-5).
3
Press
or
to set the current voltage of the batteries.
4
Press
to confirm this setting.