Carrier ComfortChoice Touch User Manual Download Page 49

Page: 49 / 112

PROGRAMMING THE THERMOSTAT

Weekday / Weekend Schedule

Use the

Weekday / Weekend

schedule to program all five (5) weekdays (Monday

thru Friday) with the same time periods and heating / cooling setpoints, and
program both Saturday and Sunday with the same time periods and heating /

cooling setpoints but different from the weekday settings.
The

Weekday / Weekend

schedule allows temperatures to be set according to the

occupancy and the activities in the home for a typical week. When the home is

unoccupied or people are sleeping, temperatures can be set lower for heating or
higher for cooling.
The

Weekday / Weekend

schedule will display the program schedule that is

executed every day for both Monday thru Friday and for Saturday and Sunday.

Refer to Fig. 27 and 28.

Summary of Contents for ComfortChoice Touch

















































































































Search results

Summary of Contents for ComfortChoice Touch

Reviews:

Related manuals for ComfortChoice Touch

Brands by name

Popular brands

Carrier ComfortChoice Touch, User Manual

Search results

Summary of Contents for ComfortChoice Touch

Reviews:

Related manuals for ComfortChoice Touch

Brands by name

Popular brands