Carrier ComfortChoice Touch User Manual Download Page 17

Page: 17 / 112

QUICK START

2. The Select Mode screen shows the different mode choices available. See

Fig. 6.

OFF -- Turns the heating and cooling system off.

HEAT -- Enables the heating equipment to operate as needed. When
the equipment is operating, a red icon will appear over the

HEAT TO

button.

COOL -- Enables the cooling equipment to operate as needed. When

the equipment is operating, a blue icon will appear over the

COOL TO

button.

AUTO -- Enables both the heating and cooling equipment to operate as

needed. When the equipment is operating, if the heating equipment is
running, then a red icon will appear over the

HEAT TO

button; if the

cooling equipment is operating, then a blue icon will appear over the

COOL TO

button.

EHEAT -- Enables emergency heat -- also known as auxiliary heat. The
EHEAT selection uses auxiliary heat only. Heat Pump heat is not used.

3. The button for the currently selected mode is indented. Select the desired

mode.

4. Press the

DONE

button to save the selection or the

CANCEL

button to

ignore all changes and return to the previous setting.

Summary of Contents for ComfortChoice Touch

















































































































Search results

Summary of Contents for ComfortChoice Touch

Reviews:

Carrier ComfortChoice Touch, User Manual, Page: 17 / 112

Search results

Summary of Contents for ComfortChoice Touch

Reviews: