16
11. INSTALLATION ACCESSORIES
11.1 STANDARD INSTALLATION ACCESSORIES SUPPLIED FROM THE FACTORY
DESCREPTION
SHAPE
QTY
USE
Wired Room Controller
With Accessories
1
To operate the air conditioner
used with indoor unit
Display & Receiver Panel
For Optional Wireless Remote
Control
1
To display operation and error codes
Owner manual
1
To illustrate control functions
of operation
Installation Manual
1
To illustrate installation instructions.
11.2 OTHER INSTALLATION ACCESSORIES
Not supplied from the factory but must be used in the installation field to complete installation.
DESCREPTION
USAGE
Electrical Connection
Cables
To electrically connect the indoor unit, the outdoor unit and circuit
breaker
ـ
Wall Sleeve
ـ
Wall Cap
ـ
Sealer putty
To fill the gap between the wall hole and the lump of refrigerant piping
lines, electrical connection cables and condensate drain line.
ـ
Finishing tape PVC film
To tie together the refrigerant piping lines, electrical connection cables
and condensate drain line.
ـ
Vinyl tape
To stick pipe insulation.
ـ
Drain hose ID 25 mm
To remove condensate water, from the indoor unit to the outside.
ـ
Refrigerant piping lines
To connect refrigerant R410A between indoor and outdoor units
ـ
Pipe insulation
To insulate suction and liquid refrigerant piping lines
- Refrigerant R410A
To adjust refrigerant charge for long refrigerant piping lines.
- Clamps or saddles
To secure the lump of refrigerant piping lines, electrical cables and
condensate drain line
Summary of Contents for ClassiCOOL 53KDHT60N-518
Page 57: ......