![background image](http://html1.mh-extra.com/html/carrier/aquasmart-30ev-series/aquasmart-30ev-series_installation-operation-and-maintenance_2562371040.webp)
40
CANCELAR
ALARME
MODO
VENTILADOR
CONFIRMAR
ALTERAR
SELECIONAR
AJUSTAR
VERIFICAR
A
D
E
B
To set the type of pump application (WP):
DPS Protection : ON
WP : Individually
FLWD : 8°C
Mfg Setting
To enable or disable the differential pressure switch “
DPS
Protection
”, follow these steps:
1. In the “Service Access” menu use the buttons SELECIONAR
“Select” (B) to select the
“DPS Protection”
option.
2. Press ALTERAR “Change” (E) up or down to select the “ON”
or “OFF”, press CONFIRMAR “Enter” (D) to end.
To set the design’s water temperature diff erence Delta
(FLWD):
CANCELAR
ALARME
MODO
VENTILADOR
CONFIRMAR
ALTERAR
SELECIONAR
AJUSTAR
VERIFICAR
A
D
E
B
1. Press SELECIONAR “Select” (B) to the “WP” option.
2. Use the buttons ALTERAR “Change” (E) up or down to
choose one of the options available, Individually (a) or
System (b):
- Individually:
1 Pump per unit.
- System:
1 Pump per system
1. Press SELECIONAR “Select” (B) down to “FLWD”, press
CONFIRMAR “Enter” (D).
2. Press ALTERAR “Change” (E) up or down to choose from
3.0°C to 10°C:
DPS Protection : ON
WP : Individually
FLWD : 8°C
Mfg Setting
DPS Protection : ON
WP : Individually
FLWD : 8.0°C
Mfg Setting
DPS Protection : ON
WP : System
FLWD : 8°C
Mfg Setting
(a)
(b)
CANCELAR
ALARME
MODO
VENTILADOR
CONFIRMAR
ALTERAR
SELECIONAR
AJUSTAR
VERIFICAR
A
D
E
B
To Restore Factory (Default) Settings
(Mfg Setting):
1. In the “Service Access” menu use the buttons SELECIONAR
“Select” (B) to select the “System Type”.
2. Use the buttons SELECIONAR “Select” (B) again to select
the “Mfg Setting” (C) and press CONFIRMAR “Enter” (D);
Set Time
Time Mode: Disable
Timer
Mfg Setting
C
CANCELAR
ALARME
MODO
VENTILADOR
CONFIRMAR
ALTERAR
SELECIONAR
AJUSTAR
VERIFICAR
A
D
E
B
5. Operation (cont.)