![background image](http://html1.mh-extra.com/html/carrier/aquaforce-puretec-30xw-pze-1001/aquaforce-puretec-30xw-pze-1001_installation-operation-and-maintenance-instructions_2562370030.webp)
30
11 - OPTIONS AND ACCESSORIES
Options
N° Description
Advantages
Use for
30XW-PZE
range
Dry-cooler control
154
Adaptation of the control box for
communication with the dry-cooler via a bus.
For dry cooler need to select the cabinet
with option control cabinet manage by the
chiller control
Easy system management, extended
control capabilities of a remote dry-cooler
301-1101
Energy Management Module 156
EMM Control board with additional inputs/
outputs. See Energy Management Module
option chapter
Extended remote control capabilities
(Set-point reset, ice storage end, demand
limits, boiler on/off command...)
301-1101
SmartVu
TM
control, 7” user
interface
158A Control supplied with a 7 inch colour touch
screen user interface
Enhanced ease of use.
301-1101
Dual relief valves on 3-way
valve
194 Three-way valve upstream of dual relief valves
on the evaporator and the oil separator
Valve replacement and inspection
facilitated without refrigerant loss.
Comforms to European standard EN378/
BGVD4
0301-1101
Compliance with Swiss
regulations
197
Additional tests on the water heat exchangers:
supply (additional of PED documents)
supplementary certificates and test
certifications
Conformance with Swiss regulations
301-1101
Compliance with Russian
regulations
199
EAC certification
Conformance with Russian regulations
0301-1101
Compliance with Australian
regulations
200 Unit approved to Australian code
Conformance with Australian regulations
301-1101
Low noise level
257 Evaporator sound insulation
3 dB(A) quiter than standard unit
401-1101
Welded evaporator
connection kit
266
Victaulic piping connections with welded joints
Easy installation
301-1101
Welded condenser water
connection kit
267
Victaulic piping connections with welded joints
Easy installation
301-1101
Flanged evaporator water
connection kit
268
Victaulic piping connections with flanged joints
Easy installation
301-1101
Flanged condenser water
connection kit
269
Victaulic piping connections with flanged joints
Easy installation
301-1101
Thermal compressor
insulation
271 The compressor is covered with a thermal
insulation layer
Prevents air humidity to condensate on the
compressor surface
301-1101
Compliance with Morocco
regulation
327
Specifics documents according Morroco
regulation
Conformance with Morocco regulations
0301-1101
Free-cooling dry-cooler
control
313
Control & connections to a Free Cooling
Drycooler 09PE or 09VE fitted with option
FC control box
Easy system managment, Extended
control capabilities to a dryccoler used in
Free Cooling mode
301-1101
Low GWP A1 R-515B
refrigerant
330 Unit delivered with R-515B refrigerant charge
(A1, GWP 299)
Reduced CO
2
footprint (GWP < 300)
A1 safety class
Reduced installed cost in technical room
0301-1101