Carrier AquaForce 30XAV 1050, Installation, Operation And Maintenance Instructions

Page: 16 / 42

16
4.4 - Electrical data, optional hydronic module
The pumps that are factory-installed in these units comply with the European Ecodesign directive ErP. The additional
electrical data required* is as follows:
For low pressure pump motors (options 116F & 116G)
N°** Description*** Units 30XAV
500 600
1 Nominal efficiency at full load and nominal voltage % 89,4 89,4
1 Nominal efficiency at 75% rated load and nominal voltage % 88,9 88,9
1 Nominal efficiency at 50% rated load and nominal voltage % 86,7 86,7
2 Efficiency level - IE3 IE3
3 Year of manufacture - This information varies depending on the manufacturer and model
at the time of incorporation. Please refer to the motor name plates.
4 Manufacturer's name and trademark, commercial registration number and place of
manufacturerw
- Same as above
5 Product's model number - Same as above
6 Number of motor poles - 2 2
7-1 Rated shaft power output at full load and nominal voltage (400Vw) kW 5,5 5,5
7-2 Maximum power input † (400 V) kW 6,15 6,15
8 Rated input frequency Hz 50 50
9-1 Rated voltage V 3 x 400 3 x 400
9-2 Maximum current drawn †† (400 V) A 9,7 9,7
10 Rated speed r/s - rpm 49 -2930 49 -2930
11 Product disassembly, recycling or disposal at end of life - Disassembly using standard tools. Disposal and recycling using an
appropriate company.
12 Operating conditions for which the motor is specifically designed
I. Altitudes above sea level m < 1000****
II. Ambient air temperature °C < 40* (up to 50°C with reduced water flow)
III. Maximum air temperature °C Please refer to the operating conditions given in this manual or in
the specific conditions in the Carrier selection programs.
IV. Potentially explosive atmosphere - Non ATEX environment
For of high pressure pump motors (options 116B & 116C)
N°* Description*** Units 30XA
500 600
1 Nominal efficiency at full load and nominal voltage % 91,3 91,3
1 Nominal efficiency at 75% rated load and nominal voltage % 91,4 91,4
1 Nominal efficiency at 50% rated load and nominal voltage % 90,3 90,3
2 Efficiency level - IE3 IE3
3 Year of manufacture - This information varies depending on the manufacturer and model
at the time of incorporation. Please refer to the motor name plates.
4 Manufacturer's name and trademark, commercial registration number and place of
manufacturer
- Same as above
5 Product's model number - Same as above
6 Number of motor poles - 2 2
7-1 Rated shaft power output at full load and nominal voltage (400V) kW 11 11
7-2 Maximum power input † (400 V) kW 12 12
8 Rated input frequency Hz 50 50
9-1 Rated voltage V 3 x 400 3 x 400
9-2 Maximum current drawn †† (400 V) A 18.7 18.7
10 Rated speed r/s - rpm 49 - 2945 49 - 2945
11 Product disassembly, recycling or disposal at end of life - Disassembly using standard tools. Disposal and recycling using an
appropriate company.
12 Operating conditions for which the motor is specifically designed
I. Altitudes above sea level m < 1000****
II. Ambient air temperature °C < 40* (up to 50°C with reduced water flow)
III. Maximum air temperature °C Please refer to the operating conditions given in this manual or in
the specific conditions in the Carrier selection programs.
IV. Potentially explosive atmosphere - Non ATEX environment
* Required by regulation 640/2009 with regard to the application of directive 2009/125/EC on the eco-design requirements for electrical motors
** Item number imposed by regulation 640/2009, annex I2b
*** Description given by regulation 640/2009, annex I2b
**** Above 1000m, a degradation of 3% for each 500m should be taken into consideration
† To obtain the maximum power input for a unit with hydronic module, add the maximum unit power input from the elctricial data table to the pump power input
†† To obtain the maximum unit operating current drawfor a unit with hydronic module, add the maximum unit current draw from electrical data table to the pump current draw