![background image](http://html1.mh-extra.com/html/carrier/aquaforce-30xa-series/aquaforce-30xa-series_installation-operation-and-maintenance-instructions_2562359040.webp)
40
9.2.6 - 30XA 1002 - heat reclaim option
ATTENTION: The condenser connection sleeves are not
installed, but supplied with the unit. The sealing joints are
in the control box. The temperature sensors and the
condenser flow switch are wired and fixed in the machine.
They must be installed as described in the chapter
“Condenser water connections”.
NOTES:
-
Drawings are not contractually binding.
-
Before designing an installation, consult the certified
dimensional drawings, available on request.
-
For the positioning of the fixing points, weight distribu-
tion and centre of gravity coordinates please refer to
the dimensional drawings.
-
If the installation includes several units or if this
(these) is (are) close to walls, please refer to chapters
3.11 - “Multiple chiller installation” and 3.12 -
“Distance to the wall” of this document to determine
the space required.
Legend
All dimensions are given in mm.
Required clearances for maintenance (see note)
Recommended space for evaporator tube removal
Water inlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certified drawing.
Water outlet for standard unit
For options 5, 6, 100A, 100C, 107 refer to the certified drawing.
Air outlet – do not obstruct
Power supply and control connection
Control circuit connection for option 158
Heat reclaim condenser
C
A
Summary of Contents for Aquaforce 30XA Series
Page 55: ......