Carrier Aqua Force 30XA, Installation, Operation And Maintenance Instructions

Page: 32 / 48

32
9 - hEaT REClaIM CONDENsER OPTION
9.1 - Technical data, 30Xa units with heat reclaim condenser option
30Xa heat reclaim mode 252 302 352 402 452 502 602 702 752 802 852 902 1002
Cooling capacity* kW 261 291 311 379 438 493 603 665 707 775 814 875 971
Heating capacity in heat reclaim mode* kW 336 373 401 481 554 620 760 832 894 974 1027 1105 1229
Total power input (unit)* kW 82 90 99 113 128 140 172 183 206 219 234 253 283
Total energy efficiency ratio (EER/COP) kW/kW 3.16/ 3.22/ 3.15/ 3.36/ 3.40/ 3.53/ 3.52/ 3.63/ 3.43/ 3.53/ 3.48/ 3.45/ 3.42/
4.07 4.13 4.06 4.27 4.31 4.46 4.44 4.55 4.35 4.45 4.40 4.38 4.35
Operating weight** kg 4230 4270 4280 5260 5380 5880 7000 7100 7470 7680 8320 8670 9280
Refrigerant charge
Circuit A kg 36 37 37 53 54,5 62 62 62 70 74 77 74 96
Circuit B kg 38 38 39 37 39 39 62 66 62 69 68 77 94
heat reclaim condenser Flooded multi-pipe condenser
Water volume l 38 38 38 55 68 68 55 + 55 55 + 55 55 + 68 55 + 68 55 + 68 68 + 68 68 + 68
Water connections Victaulic
Diameter in 3-1/2 3-1/2 3-1/2 4 4 4 4 4 4 4 4 4 4
Outside diameter mm 93 93 93 106 106 106 106 106 106 106 106 106 106
* Entering and leaving water temperature: evaporator 12°C/7°C; heat reclaim condenser: 40°C/45°C
** Weights are for guidance only
9.2 - Dimensions, clearances
9.2.1 - 30Xa 252-352 - heat reclaim option
legend:
All dimensions are given in mm.
Required clearances for maintenance and air flow
Recommended space for evaporator tube removal
Water inlet
Water outlet
Air outlet – do not obstruct
Power supply connection
Control circuit connection
Heat reclaim condenser
ATTENTION: The Victaulic flange sleeves of the condenser
are not installed, but supplied with the unit. The sealing
joints are in the control box. The temperature sensors and
the condenser flow switch are wired and fixed in the
machine. They must be installed as described in the chapter
“Condenser water connections”.
NOTE: Drawings are not contractually binding. Before
designing an installation, consult the certified dimensional
drawings supplied with the unit or available on request.
For the positioning of the fixing points, weight distribution
and centre of gravity coordinates please refer to the dimen-
sional drawings.
1
2
C
A
C
A A
A
Ø141.30
2297
1500
3582
2231
2253
500
1500
2200
470
2238
1500
3604
209
560