![background image](http://html1.mh-extra.com/html/carrier/69nt40-561-201/69nt40-561-201_operation-and-service-manual_2561781051.webp)
3
−
22
T-364
5 Controller Function Codes (Sheet 4 of 6)
Display Only Function
−
Cd44 is a display only function.
Cd44 (NOT USED)
----
Configurable Functions
−
Cd45 through Cd48 are user-selectable functions. The operator can change the value of
these functions to meet the operational needs of the container.
Cd45 (NOT USED)
Cd46 Airflow Display Units
Selects the airflow units to be displayed by Cd45 if configured for Vent Position
Sensor or displayed by “USER/FLO” under Cd43 if configured for Autoslide.
CF= Cubic Feet per Minute
CM=Cubic Meters per Hour
bOth=Displays CF or CM depending on the setting of Cd28 (Metric/Imperial) or
the pressing of the degree C/F key.
Cd47 Variable Economy
Temperature Setting
Used when Economy Mode (CnF22) is set to 3
−
cust. Display will show “----” when
the unit is not configured for Economy Mode.
When the unit has a perishable setpoint and Economy Mode is active, at the start
of each cooling or heating cycle, high speed evaporator fans will run for 3
minutes. After three minutes, the evaporator fans will be switched to low speed
any time that the supply temperature is /
−
0.25
C of the setpoint and the
return temperature is less than or equal to the supply tempe the user se-
lected Cd47 (values are 0.5
C
−
4.0
C, default is 3.0
C).
Cd48 (NOT USED)
----
Display Only Function
−
Cd49 is a display only function.
Cd49 Days Since Last
Successful Pre-trip
Displays the number of days since last successful pretrip sequence.
Press ENTER to view the number of days since the last successful pretrip for
Auto1, Auto2, and Auto2 in sequence.
Press CODE SELECT to step back through the list and ultimately to exit the
Cd49 display.
Configurable Functions
−
Cd50 through Cd53 are user-selectable functions. The operator can change the value of
these functions to meet the operational needs of the container.
Cd50 (NOT USED)
----
Cd51 (NOT USED)
----
Summary of Contents for 69NT40-561-201
