![background image](http://html1.mh-extra.com/html/carrier/69nt40-541-300/69nt40-541-300_operation-and-service_2563728016.webp)
Safety
−
4
T-318
CAUTION
Take necessary steps (place plywood over
coil or use sling on motor) to prevent motor
from falling into condenser coil.
CAUTION
DO NOT disassemble piston from NEW
suction modulating valve powerhead
assembly. Doing so may result in damage to
piston.
CAUTION
Do not remove wire harnesses from con-
troller unless you are grounded to the unit
frame with a static safe wrist strap.
CAUTION
Unplug all controller connectors before
performing arc welding on any part of the
container.
CAUTION
The unit must be OFF whenever a program-
ming card is inserted or removed from the
controller programming port.
CAUTION
Do not allow moisture to enter wire splice
area as this may affect sensor resistance.
CAUTION
Do not allow the recorder stylus to snap
back down. The stylus arm base is
spring-loaded, and damage may occur to
the chart or the stylus force may be altered.
CAUTION
DO NOT move the stylus arm up and down
on the chart face. This will result in damage
to the stylus motor gear.