![background image](http://html1.mh-extra.com/html/dodge/quantis-msm/quantis-msm_instruction-manual_2515961001.webp)
1
Quantis
®
MSM Reducer
Instruction Manual
Gearmotors
C-Face Reducers
Separates
Sizes 38–168
These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of
printing. Please see
dodgeindustrial.com
for updated instruction manuals.
WARNING: To ensure the drive is not unexpectedly started, turn
off and lock-out or tag power source before proceeding. Failure to
observe these precautions could result in bodily injury.
WARNING: All products over 25 kg (55 lbs) are noted on the shipping
package. Proper lifting practices are required for these products.
WARNING: High voltage and rotating parts can cause serious or fatal
injury and property damage. The use of electrical machinery, like all
other utilization of concentrated power and rotating equipment, can
be hazardous. Installation, operation and maintenance should be
performed only by qualified electrical and mechanical maintenance
personnel familiar with NEMA safety standards, the National
Electrical Code and sound local practices. The manual is to be
studied thoroughly by personnel responsible for the installation and
maintenance of this equipment before installation is begun. Personnel
must be familiar with the potential hazards involved. If this warning
is not observed, personal injury and/or property damage may result.
Keep this document for future reference.
WARNING: Depending on operating conditions, sound levels for
Quantis products may exceed 70 dB. Protective measures such as
hearing protection may be needed when in close proximity to a Quantis
Reducer in operation.
WARNING: Quantis products exceeding 30 lb (13.5 kg) should be lifted
using lift-assist equipment rated for the weight of the product. Weight
values for all Quantis products are listed in the Gearing Engineering
Catalog. Lifting brackets provided on Quantis should be used when
connecting to lift-assist equipment.
WARNING: Because of the possible danger to person(s) or property
from accidents which may result from the improper use of products,
it is important that correct procedures be followed. Products must be
used in accordance with the engineering information specified in the
catalog. Proper installation, maintenance and operation procedures
must be observed. The instructions in the instruction manuals must
be followed. Inspections should be made as necessary to assure
safe operation under prevailing conditions. Proper guards and other
suitable safety devices or procedures as may be desirable or as may
be specified in safety codes should be provided, and are neither
provided by Dodge nor are the responsibility of Dodge. This unit and
its associated equipment must be installed, adjusted and maintained
by qualified personnel who are familiar with the construction and
operation of all equipment in the system and the potential hazards
involved. When risk to persons or property may be involved, a holding
device must be an integral part of the driven equipment beyond the
speed reducer output shaft.
GENERAL
Please read these instructions carefully. They contain vital
information on proper installation, operation, maintenance and
service for the Dodge Quantis MSM gear reducer.
Each Dodge gear reducer is thoroughly inspected and tested at
the factory prior to shipment. Care is taken in packing of each
gear reducer. However, each gear reducer should be thoroughly
inspected before it is accepted from the transportation company.
If any of the goods called for in the bill of lading are damaged or
missing, do not accept the shipment until the freight agent makes
appropriate notation on your freight bill. If any loss or damage
is discovered later, notify the agent at once and request an
inspection. Though Dodge will be happy to assist you with claims
for loss or damage in shipment, the transportation company is
responsible for reimbursing you for such claims. Claims for loss
or damage in shipment must not be deducted from the Dodge
invoice, nor should payment of the Dodge invoice be withheld
awaiting claims adjustment. The carrier, not Dodge, guarantees
safe delivery. If considerable damage or shortage has occurred
and the situation is urgent, contact your local representative.
WARRANTY
NOTE: Service and repair under warranty should be
performed only by an Dodge Industrial Inc. Authorized
Service Shop. Contact Dodge Industrial Inc. Product
Support for Assistance.
The Dodge Quantis MSM is warranted under the Dodge
Industrial Inc. “Standard Terms and Conditions of Sale”.
Warranty claims must be submitted to Dodge Industrial Inc.
within one year from the date of installation or within three
years from the date of manufacture, whichever comes first. The
warranty does not extend to failures induced by misuse, improper
storage or handling, abuse, or misapplication.