![background image](http://html1.mh-extra.com/html/carrier/53vmct-18c-24c-30c-36c/53vmct-18c-24c-30c-36c_owners-manual_2561772015.webp)
( 12 )
USE OF REMOTE CONTROL (Cont.)
AUTO MODE
START
1. Press MODE button to select AUTO mode
on the remote control display.
2. Press TEMP buttons or to select the
set temperature on the remote control display.
Set desired temp. between 17°C to 30°C .
3. Press FAN SPEED button to select
the desired fan speed appears
on the remote control display.
4. Press ON/OFF button to start
the air conditioner.
ON symbol
appears on the
remote control display.
OPERATION led
will illuminate
on the display panel of indoor unit.
AUTO mode starts after approximately 3 minutes
STOP
If you want to stop the air conditioner,
Press ON/OFF button again.
NOTES
1. For Heat Pump System
When Auto mode is activated, the air conditioner changes the operation mode automatically to cool
or heat or fan only mode and also changes fan speed to auto speed by sensing the temperature
difference between room temperature and set temperature.
2. For Cool Only System
When Auto mode is activated, the air conditioner changes the operation mode automatically to cool
or fan only mode and also changes fan speed to auto speed by sensing the temperature difference
between room temperature and set temperature.
3. In the Auto mode, you cannot switch the fan speed. It has already been automatically controlled.
4. If the Auto mode is not comfortable for you, the desired mode can be selected manually.
5. If the Eco function is activated when the unit is operating in Auto mode, the fan speed will change
into Low speed mode immediately.
4
2
2
1
3