![background image](http://html.mh-extra.com/html/carrier/50hx-guide/50hx-guide_installation-start-up-and-operating-instructions-manual_2563314005.webp)
holes are provided in base rails as shown in Fig. 7, See Detail “A”
or “B-B”. Refer to rigging instructions on unit.
INSTALLATION
1. Position the lifting bracket assembly around the base of the
unit. Leave the top shipping skid on the unit to act as a
spreader bar. Be sure the strap does not twist.
2. Place each of the four (4) metal lifting brackets into the
rigging holds in the composite pan.
3. Tighten the ratchet strap unit tight. Lifting brackets should be
secure in the rigging holds.
4. Attach the clevis or hook of sufficient strength to hole in the
lifting bracket (See Fig. 7).
5. Attach safety straps directly to the field supplied rigging straps
or clevis clip. Do not attach the safety straps to the lifting
brackets.
6. Use the top of the unit as a spreader bar to prevent the rigging
straps from damaging the unit. If the wood top is not available,
Fig. 4— 50HX036-060 Unit Dimensions (without base rails)
UNIT
ELECTRICAL CHARACTERISTICS
UNIT WEIGHT
CORNER WT
LB/KG
CENTER OF GRAVITY
IN/MM
lb.
kg
A
B
C
D
X
Y
Z
50HX036
208/230-1-60
316
144
46/21
103/47
81/37
86/39
21.2/539
20.4/520
13.6/347
50HX042
208/230-1-60
316
144
46/21
103/47
81/37
86/39
21.2/539
20.4/520
13.6/547
50HX048
208/230-1-60
359
163
89/40
81/37
113/51
76/35
19.7/500
20.5/522
15.0/381
50HX060
208/230-1-60,
373
170
92/42
85/39
116/53
80/36
19.6/499
20.6/523
15.0/381
C95005
5