![background image](http://html1.mh-extra.com/html/carrier/50fc-series/50fc-series_installation-operation-and-maintenance-instructions_2561558053.webp)
53
14 - MAINTENANCE
14.1 - General recommendations
To ensure optimal e
ffi
ciency and reliability of the equipment and
all its functions, we recommend taking out a maintenance contract
with the local organisation set up by your manufacturer. This
contract will include regular inspections by the manufacturer’s
Service specialists so that any malfunction is detected and
corrected quickly, ensuring that no serious damage can occur
The manufacturer’s service maintenance contract is the best
way to ensure the maximum operating life for your equipment
and, through the expertise of manufacturer’s quali
fi
ed personnel,
provides the ideal way to manage your system energy consumption
e
ff
ectively.
The refrigeration equipment must be serviced by professionals;
however, routine checks may be carried out locally by specially
trained technicians. See standard EN 378-4.
All refrigerant charging, removal and draining operations
must be carried out by a quali
fi
ed technician and with the
correct equipment for the unit. Any inappropriate handling
can lead to uncontrolled
fl
uid or pressure leaks.
Before performing any work on the machine ensure
it is de-energised.
If a refrigerant circuit is opened, it must be evacuated,
recharged and tested for leaks.
Before any operation on a refrigerant circuit, it is
necessary to evacuate the refrigerant charge from
the device using a charge transfer unit.
Simple preventive maintenance will allow you to get the best
performance from your rooftop unit:
■
Optimisation of energy performance,
■
Reduced electricity consumption.
■
Prevention of accidental component failure.
■
Prevention of major time-consuming and costly work.
■
Protection of the environment.
There are di
ff
erent maintenance levels for refrigeration units, as
de
fi
ned by the AFNOR NF X 60 010 standard.
Note: Any deviation from or failure to comply with these
maintenance criteria will render the guarantee conditions for the
refrigeration unit null and void, and will release the manufacturer
from its liability.
14.2 - Servicing
Level 1 maintenance
These simple procedures can be carried out by the user:
■
Visual inspection for oil traces (sign of a refrigerant leak).
■
Clean the air-cooled exchangers (see the dedicated section).
■
Check that the protective grilles (optional) are present and in
good condition; and that the doors and covers are properly
closed.
■
Check the unit’s alarm report (see the control manual);
■
Check for any general signs of deterioration,
■
Check the anti-corrosion coatings.
Level 2 maintenance
This level requires speci
fi
c expertise in electrical, cooling and
mechanical systems.
It is possible that this expertise may be available locally; there may
be a maintenance service, industrial site or specialist subcontractor
in the area.
The frequency of this maintenance level may be monthly or annual,
depending on the veri
fi
cation type.
In these cases, the following maintenance operations are
recommended:
Carry out all level 1 operations, then:
Electrical checks (annual checks):
■
At least once a year tighten the electrical connections for the
power supply circuits (see tightening torques table).
■
Check and tighten all control connections, if required.
■
Check the labelling of the system and instruments, re-apply the
missing labels if required.
■
Remove the dust and clean the interior of the electrical boxes.
Be careful not to blow dust or debris into components; use a
brush and vacuum wherever possible.
■
Clean the insulators and bus bar supports (dust combined with
moisture reduces the insulation gaps and increases current
leakage between phases and from phase to ground).
■
Check the presence, condition and operation of electrical
protective devices.
■
Check the presence, condition and operation of control
components.
■
Check that all heaters are operating correctly.
■
Replace the fuses every 3 years or every 15000 hours (ageing).
■
Check that no water has penetrated into the electrical cabinet.
■
On the electrical cabinet, regularly check the cleanliness of the
fi
lter media to maintain the correct air
fl
ow.
Mechanical checks:
■
Check that the mounting bolts for the ventilation sub-assemblies,
fans, compressors and electrical cabinet are securely tightened.
Refrigerant circuit checks:
■
The unit is subject to F-gas tight regulatory checks.
■
Check the unit operating parameters and compare them with
the previous values.
■
Check the operation of the high-pressure switches. Replace
them if there is a fault.
■
Check the fouling of the
fi
lter driers. Replace them if necessary.
■
Keep an up-to-date service booklet speci
fi
c to the refrigeration
unit in question.
Ensure all adequate safety measures are taken for
all these operations: use appropriate PPE (personal
protective equipment), comply with all industry and
local regulations, use common sense.
Summary of Contents for 50FC Series
Page 63: ......