![background image](http://html1.mh-extra.com/html/carrier/48-50pd05/48-50pd05_user-manual_2560924053.webp)
53
Variable Frequency Drive (VFD)
The VFD varies the frequency of the AC voltage supplied to the
indoor fan. (See Fig. 20 and Table 23.) This causes the variance in
the speed of the fan. The commanded fan speed is received by the
VFD from the AUX1 board as a 2--10vdc signal.
The AI1 DIP switch must be in the off (or towards “U”) position to
properly read the analog signal. There are three jumper wires that
must remain installed for proper operation. The VFD is mounted
behind the fan housing on the fan sled and the remote keypad is
mounted on the front of the fan housing for easy access. The VFD
is factory set to the auto mode for unit operation.
C09146
Fig. 20 -- Variable Frequency Drive (VFD)
Table 23 — VFD Connections
DISPLAY NAME
POINT DESCRIPTION
TYPE OF I/O
TERMINAL
NUMBER
TERMINAL
NAME
LOW VOLTAGE INPUTS
Shielded Cable Ground
Shield
1
SCR
F.SPD
Commanded Fan Speed
2---10vdc
2
AI1*
Analog Input 1 Common
Ground
3
AGND
Low Voltage Power (jumped to DI1 & DI4)
24v
10
24v
Low Voltage Common (jumped to DCOM)
Ground
11
GND
Discrete Inputs Common (jumped from GND)
Ground
12
DCOM
Discrete Input 1 (jumped from 24v)
Switch Input
13
DI1
Discrete Input 4 (jumped from 24v)
Switch Input
16
DI4
HIGH VOLTAGE
Voltage Leg from IFC---21
Voltage Input
U1
MAINS
Voltage Leg from IFC---22
Voltage Input
V1
MAINS
Voltage Leg from IFC---23
Voltage Input
W1
MAINS
Voltage Leg to IFM---3
Voltage Output
U2
MOTOR
Voltage Leg to IFM---2
Voltage Output
V2
MOTOR
Voltage Leg to IFM---1
Voltage Output
W2
MOTOR
* Requires the Al1 dip switch to be in in the Off (or towards “U”) position.
48/
50P
D