Carrier 42UQV050M Series, Service Manual, Page: 44 / 106

FILE NO. SVM-13035
5. ECO OPERATION
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically
1
degree/
hour for 2 hours
(maximum 2 degrees increase).
For heating operation the set temperature will decrease.
6. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
•
Pressing the RESET button, the unit can start or stop
without using the remote control.
•
Operation mode is set on AUTOMATIC
operation, preset temperature is 2
4
°C
and fan operation is automatic speed.
7. TIMER OPERATION
Setting the ON Timer Setting the OFF Timer
Press : Set the desired ON timer. Press : Set the desired OFF timer.
Press :
Set the timer.
Press : Set the timer.
: Cancel the time
Press
: Set the ON timer . Press .
Press : Set the OFF timer .
Press button during the ( or )
mark flashing.
1
1
2
3
2
3
4
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
•
During the daily timer is activation, both arrows are indicated. ( or )
: Cancel the timer.
Note:
•
Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
•
The setting will be saved for the next same operation.
4. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling
or heating
Press : Start and stop the operation.
operation (except in DRY and FAN ONLY mode)
3. DRY OPERATION
For dehumidification a moderate cooling perfermance is controlled automatically.
1. Press : Select Dry .
2. Press : Set the desired temperature.
Set the timer when the air conditioner is operating.
Press
Press
RESET
RESET button
– 43 –