![background image](http://html1.mh-extra.com/html/carrier/42tvgs010-703/42tvgs010-703_owners-manual_2560893011.webp)
Note:
●
The provided Remote Controller is a wireless type, which also can be
used as a wire. Please see “How to Connect The Remote Controller
for Wired Operation”, located in installation instruction, in case of wired
control is required.
●
In wire operation, remote controller will return to initial condition (PRESET,
TIMER and CLOCK will return to initial condition) when user shutdown
power supply of Air conditioner.
REMOTE CONTROL
4
COOLING / FAN ONLY OPERATION
DRY OPERATION
7
For dehumidi
fi
cation, a moderate cooling performance is controlled automatically.
1.
Press
MODE
: Select Dry
.
2.
Press
: Set the desired temperature.
6
1.
Press
MODE
: Select Cool
or Fan only
.
2.
Press
: Set the desired temperature.
Cooling: Min. 17°C, Fan Only: No temperature indication
3.
Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, or HIGH
Hi-POWER OPERATION
8
To automatically control room temperature and air
fl
ow for faster cooling
operation (except in DRY and FAN ONLY mode)
Press
: Start and stop the operation.
ECO OPERATION
9
To automatically control room to save energy (except in DRY and FAN ONLY
mode)
Press
: Start and stop the operation.
Note:
Cooling operation; the set temperature will increase automatically 1
degree/hour for 2 hours (maximum 2 degrees increase).
TEMPORARY OPERATION
10
In case of the misplaced or discharged remote control
●
Pressing the RESET button, the unit can start or
stop without using the remote control.
●
Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
TIMER OPERATION
11
Set the timer when the air conditioner is operating.
Setting the ON Timer
Setting the OFF Timer
1
Press
: Set the desired
ON timer.
Press
: Set the desired
OFF timer.
2
Press
: Set the timer.
Press
: Set the timer.
3
Press
: Cancel the timer.
Press
: Cancel the timer.
Daily timer allows the user to set both the ON & OFF timers and will be
activated on a daily basis.
Setting Daily Timer
1
Press
: Set the ON timer.
3
Press
.
2
Press
: Set the OFF timer.
4
Press
button during
the ( or ) mark
fl
ashing.
●
During the daily timer is activating, both arrows ( , ) are indicated.
Note:
●
Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
●
The setting will be saved for the next same operation.
DISPLAY LAMP BRIGHTNESS ADJUSTMENT
12
To decrease the display lamp brightness or turn it off.
1. Press and hold
for 3 seconds until brightness level (
,
,
or
) is shown on remote control LCD then release the button.
2. Press
Rise
or
Decrease
to adjust brightness in 4 levels.
Remote control
LCD
Operation display
Brightness
Lamp illuminates full brightness.
100%
Lamp illuminates 50% brightness.
50%
Lamp illuminates 50% brightness and the operation lamp
is turned off.
50%
All lamps are turned off.
All turned off
●
In the examples of
and
, the lamp illuminates for 5 seconds before
going off.
PRESET OPERATION
13
Set your preferred operation for future use. The setting will be memorized by
the unit for future operation (except air
fl
ow direction).
1. Select your preferred operation.
2. Press and hold
for 3 seconds to memorize the setting.
The
P
mark displays.
3.
Press
: Operate the preset operation.
EN
.
or Quiet
.
or Quiet
1
Infrared signal emitter
2
Start/Stop button
3
Mode select button (MODE)
4
Temperature button (TEMP)
5
Fan speed button
6
Swing louver button
7
Set louver Up-Down button (FIX )
8
On timer button (ON)
9
Off timer button (OFF)
10
Setup button (SET)
11
Clear button (CLR)
12
Memory and Preset button (PRESET)
13
AIR FLOW selection button (AIR FLOW)
14
High power button
15
Economy button (ECO)
16
Set louver Left-Right button (FIX )
17
18
Filter reset button (FILTER)
19
Set clock button (CLOCK)
20
Check button (CHECK)
21
Reset button (RESET)
AUTOMATIC OPERATION
5
To automatically select cooling or fan only operation
1.
Press
MODE
: Select A.
2.
Press
: Set the desired temperature.
3.
Press
: Select AUTO, LOW , LOW+
, MED
,
MED+
, or HIGH
.
or Quiet
.
or Quiet
ECO sleep button
@TeddyAir 095-323-9555
www.TeddyAirCond.com