Carrier 42TVCA010, Installation Manual

Page: 8 / 40

6
INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS INSTALLATION DIAGRAM OF INDOOR AND OUTDOOR UNITS
Part
code
Parts name Q’ty
A
Refrigerant piping
Liquid side : Ø6.35 mm
Gas side
: Ø9.52 mm
(42TVCA010, 013)
: Ø12.70 mm
(42TVCA018)
One
each
B
Pipe insulating material
(polyethylene foam, 6 mm thick)
1
C Putty, PVC tapes
One
each
Optional Installation Parts
Insulate the refrigerant pipes separately
with insulation, not together.
6 mm thick heat resisting
polyethylene foam
3
Batteries
7
Flat head
wood screw
4
Remote control
holder
Vinyl tape
Apply after carrying
out a drainage test.
2
Wireless
remote control
Saddle
Extension drain hose
(Not available,
provided by installer)
Shield pipe
(Attach to the front panel.)
Air
fi lter
Hook
Hook
Hook
1
Installation
plate
5 Filter
6
Mounting
screw
• Secure the outdoor unit with fi xing bolts and nuts if the unit is likely to be
exposed to a strong wind.
• Use Ø8 mm or Ø10 mm anchor bolts and nuts.
Fixing bolt arrangement of outdoor unit
Drain outlet
Air inlet
Air outlet
108 mm
28 mm
600 mm
320 mm
125 mm
86 mm
102 mm
90 mm
Ø38 mm
340 mm
Cut out a piece of SPACER from indoor
unit packaging box, roll it and insert
between the indoor unit and wall to tilt
the indoor unit for better operation.
For the rear left and bottom left piping
Wall
The auxiliary piping can be connected
to rear left, rear right, bottom right or
bottom left.
Bottom left
Bottom
right Rear
left
Rear right
Make sure to run the drain hose sloped
downward.
Do not allow the drain hose to get slack.
Cut the piping
hole sloped
slightly.
Refrigerant piping must be protected
from physical damage.
Install a plastic cover or equivalent.
The fl are connection should be installed
outdoors.
100 mm or more
600 mm or more
600 mm or more
100 mm or more
600 mm or more
300 mm or more
73 mm or more
350 mm or more
01_1129850104-EN.indd 6 01_1129850104-EN.indd 6 17/12/2563 BE 10:37 17/12/2563 BE 10:37