![background image](http://html1.mh-extra.com/html/carrier/42tvca010/42tvca010_installation-manual_2560891012.webp)
10
Do not form the
drain hose into
a wavy shape.
Do not rise the
drain hose.
50 mm
or more
Do not put the
drain hose end
into water.
Do not put the
drain hose end in the
drainage ditch.
Drainage
1. Run the drain hose sloped downwards.
NOTE
• The hole should be made at a slight downward slant on the outdoor side.
Shield pipe
Inside the room
Drain hose
Extension drain hose
2. Put water in the drain pan and make sure that the water is drained out of
doors.
Arrange the drain pipe for proper drainage from the unit.
Improper drainage can result in dew-dropping.
CAUTION
This air conditioner has the structure designed
to drain water collected from dew, which forms
on the back of the indoor unit, to the drain pan.
Therefore, do not store the power cord and other
parts at a height above the drain guide.
Drain
guide
Space for pipes
Wall
3. When connecting extension drain hose, insulate the connecting part of
extension drain hose with shield pipe.
CAUTION
MOUNTING INDOOR UNIT TO THE INSTALLATION PLATE
• The lower part of indoor unit may
fl
oat, due to the condition of piping
and installer cannot
fi
x it to the installation plate. In that case, use the
screws provided to
fi
x the indoor unit with the installation plate.
• Especially when the pipes are pulled out to the left side, the indoor
unit must be screwed to the installation plate.
Indoor unit
Wall
Installation plate
Screw
8
Screw
8
Screw
8
1
DIRECTLY MOUNTING INDOOR UNIT TO THE WALL
• In case left side or right of indoor unit may
fl
oat, the provided screws
should be used to
fi
x the indoor unit directly to the wall at the
predetermined position.
• In the case of block, brick, concrete or similar type wall, determining the
mount screw position on the wall can be used symbol (
►
) on the main
body of indoor unit for drill hole to insert clip anchors for appropriate
mounting screw.
Front panel
Reference
symbol
Mounting screw
position
Air inlet grille
Mounting
screw
6
01_1129850104-EN.indd 10
01_1129850104-EN.indd 10
17/12/2563 BE 10:38
17/12/2563 BE 10:38
Summary of Contents for 42TVCA010
Page 37: ...MEMO 02_1129850104 TH indd 18 02_1129850104 TH indd 18 4 1 2564 BE 12 03 4 1 2564 BE 12 03 ...
Page 38: ...MEMO 02_1129850104 TH indd 19 02_1129850104 TH indd 19 4 1 2564 BE 12 03 4 1 2564 BE 12 03 ...
Page 39: ...02_1129850104 TH indd 20 02_1129850104 TH indd 20 4 1 2564 BE 12 03 4 1 2564 BE 12 03 ...