background image

4

1 - GENERAL

1.1 - General warnings

 After unpacking, make sure that all the components are present. If not, contact the CARRIER who sold the unit to you.
 CARRIER Fan Coil must be installed by an authorised installer who, on completion of the work, will release a declaration of 

conformity to the client in respect of the laws in force and the indications given by CARRIER in the instructions leaflet supplied together 

with fan coil.

 These units have been designed both for conditioning and/or heating environments and must be destined for this use only and 

compatibly with their performance characteristics.
CARRIER accepts no responsibility, either contractual or extra-contractual, for any damage caused to persons, animals of property 

as a result of incorrect installation, adjustment or maintenance or improper use.

 In case of water leaks, turn the master switch of the system to “OFF” and close the water taps.

As soon as possible, call the CARRIER technical service department or else professionally qualified personnel and do not intervene 

personally on the unit.

 The concealed version 42SIN & 42SIL do not have a grill or covering plate. Provide safety guards and air inlet/outlet grills to prevent 

accidental contact with the device.

 If the unit is not used for a log period of time, the following operations should be performed:

 

-

Turn the master switch of the system to “OFF”

 

-

Close the water taps

 

-

If there is the risk of freezing, make sure that anti-freeze has been added to the system otherwise empty the system.

 If the room temperature is too low ot too high it is damaging for the health and is also a useless waste of energy.

Avoid prolonged contact with the direct air flow. 

 Do not leave the room closed for long periods. Periodically open the windows to ensure a correct change of air.

 This instruction leaflet is an integral part of the unit and consequently must be kept carefully and must ALWAYS accompany the 

unit, even when it is passed to a new owner or user or transferred onto another system. If it is lost or damaged, please contact the 

local CARRIER technical service centre.

 All  repair  or  maintenance  interventions  must  be  performed  by  the  technical  service  department  or  by  professionally  qualified 

personnel as foreseen in this booklet. Do not modify or intervene on the unit as this could create dangerous situations and the 

manufacturer will not be responsible for any damage caused.

 Danger from burns - take care when touching

1.2 - Fundamental safety rules

 Remember that some fundamental safety rules should be followed when using a product that uses electricity and water, such as:
 It is forbidden for the unit to be used by children or unassisted disabled persons.
 It is forbidden to touch the unit with wet hands or body when barefoot.
 It is forbidden to carry out any cleaning before having disconnected the unit from the electricity mains supply by turning the system 

master switch to “OFF”.

 It is forbidden to modify the safety or adjustment devices or adjust without authorisation and indications of the manufacturer.
 It is forbidden to pull, cut or knot the electrical cables coming out of the unit, even if it is disconnected from the mains supply.
 It is forbidden to poke objects or anything else through the inlet or outlet grills.

 It is forbidden to open the doors which access the internal parts of the unit without first turning the system master switch to “OFF”. 

 It is forbidden to dispose of or leave in the reach of children the packaging materials which could become a source of danger.
 It is forbidden to climb onto the unit or rest any object on it.  
 The external parts of the unit can reach temperatures of more than 70°C.

Summary of Contents for 42SIC

















Reviews: