14
SELECTING INSTALLATION LOCATION FOR INDOOR UNIT (Cont.)
9.2 POSSIBLE OUTLET LOCATIONS OF REFRIGERANT PIPING LINES FROM INDOOR UNIT
Possible outlet locations of refrigerant
piping lines from indoor unit.
The refrigerant piping lines can be
connected in one of the following Four
outlet locations as indicated by (1), (2), (3)
and (4)
When the piping is connected to the
direction of (1) or (2) or (4),
Detach the knock – out either at the side
or at the bottom of the unit. See fig. (2)
NOTE:
The recommended outlet location to pass
refrigerant piping lines, electrical cables
and condensate drain line either from
behind unit right or from behind unit left to
keep appearance of installation and to
facilitate installation.
The unit hides the refrigerant lines;
electrical cables and condensate drain line.
*
Note:
In case of impossibility of mounting the indoor unit directly on the wall, use floor support for indoor unit
SR
OUTLET
LOCATION
NOTES
1 UNIT RIGHT
Remove right side knock-out
2
UNIT
BOTTOM
Remove bottom knock-out
3
UNIT BACK
Do not remove side
or bottom knock-out
4 UNIT LEFT
Remove left side knock-out
Fig. (1)
4
3
2
1
4
2
1
Fig. (2)
Summary of Contents for 42QG18-C
Page 1: ...0 2009 ...
