background image

2

Safety should always be first priority when handling, install-

ing, operating or servicing mechanical equipment. Always fol-

low all safety codes, procedures and protocols.
Consult applicable local building codes and National Electrical

Codes (NEC) for special requirements. See Fig. 1 for Proposi-

tion 65 warning label. Be alert to safety information: symbols,

words such as DANGER, WARNING and CAUTION.
Improper installation, adjustment, service, maintenance, or use

can cause explosion, fire, electrical shock, or other conditions,

which may result in personal injury or property damage. This

product must be installed only by personnel with the training,

experience, skills, and applicable licensing that makes him/her

“a qualified professional HVACR installer.”

Fig. 1 — Proposition 65 Warning Label

AHRI Certification

Carrier’s Horizontal Direct Drive Blower Coil units are certi-

fied in compliance with Air-Conditioning, Heating, and Re-

frigeration Institute (AHRI) industry standard AHRI-440 for

room fan coil units.

C-ETL-US Listing

Carrier’s Direct Drive Series blower coil units are listed by

Intertek Testing Services (ITS). ITS’s C-ETL-US listing

signifies that Carrier’s blower coil units have been examined

by ITS and comply with the minimum requirements of U.S.

and Canadian national product safety standard, UL 1995/CSA

C22.2 No. 236, and that Carrier’s manufacturing site has been

audited. ITS’s re-examination service includes periodic visits

to Carrier’s factory to ensure continued compliance for all

listed products.

Introduction

Carrier fan coil units represent a prudent investment offering

trouble free operation and long service with proper installation,

operation, and regular maintenance. The equipment covered by

this manual is available with a variety of options and accesso-

ries. Always consult the approved unit submittals, order ac-

knowledgment, and other manuals for specific details on unit

options and accessories. Always follow proper procedures re-

lated to safety, handling, installation, operation, and servicing

of mechanical equipment as the manufacturer assumes no re-

sponsibility for personal injury or property damage resulting

from improper or unsafe practices during the handling, installa-

tion, service, or operation of any equipment.

CAUTION

Disconnect all power prior to any installation or service

(unit may use more than one power source; ensure all are

disconnected). Power to remote mounted control devices

may not be supplied by unit.
Install approved Lock-Out/Tag-Out protection devices on

ALL incoming power sources to equipment being installed

or serviced prior to beginning any work. Always verify all

incoming power sources are de-energized using an electri-

cal multi-meter.

WARNING

NO ATTEMPT SHOULD BE MADE TO HANDLE, IN-

STALL, OR SERVICE ANY UNIT WITHOUT FOLLOW-

ING SAFE PRACTICES REGARDING MECHANICAL

EQUIPMENT.
Always use proper equipment support. Secure all pre-instal-

lation supports.

CAUTION

Never wear bulky or loose fitting clothing when working on

any mechanical equipment. Gloves should always be worn

for protection against sharp sheet metal edges, heat, and

other possible injuries. Safety glasses or goggles should al-

ways be worn, especially when drilling, cutting, or working

with refrigerants, lubricants or cleaning chemicals.

CAUTION

Always protect adjacent flammable material when welding

or soldering. Use a suitable heat shield material to contain

sparks or drops of solder. Have a fire extinguisher readily

available.

CAUTION

Always protect chilled and hot water valve bodies, strain-

ers, ball valves, and other flow control related devices from

heat caused by soldering or brazing processes.

This product can expose you to chemicals
including Acrylamide, which is known to the 
State of California to cause cancer and birth
defects or other reproductive harm.
For more information, go to 
www.P65Warnings.ca.gov

WARNING

!

!

!

AVERTISSEMENT

ADVERTENCIA

Ce produit peut vous exposer à des produits
chimiques, y compris l’acrylamide, qui est 
connu dans l’État de Californie pour causer
le cancer et des malformations congénitales
ou d’autres problèmes de reproduction. Pour 
de plus amples informations, prière de 
consulter www.P65Warnings.ca.gov 

Este producto puede exponerlo a productos
químicos como la acrilamida, que en el
estado de California es causante de cáncer
y defects de nacimiento u otros daños
reproductivos. Para mayor información, visite
www.P65Warnings.ca.gov

343839-101 REV.A

Summary of Contents for 42DH 06

































Reviews: